Smoking Tail Lights

[Burkerice07]

Hey, I have allot of tutorials on how to blacken your rear taillights, And im ready to Take the Plunge.

But where do i go to buy the cans of Blackener and clear-coat???

I don't Really Haft to buy them offline do i???

Thanks
Burke

 

[EMT/SRT]

I used 5% window tint on mine. Looked pretty good to me. But I have to say, from the ones I've seen with the paint and clearcoat, looks much better. Good luck!

 

[Burkerice07]

I might give that a try first, Just to see how it turn out, But still, Where do i get the cans from???

 

[EMT/SRT]

Check with a local auto parts store. They can usually order it. VHT Nite Shade.

 

[amtrucker22]

This is where I ordered my nite shade from --> LINK

I picked up some clear from Advance auto

 

[Burkerice07]

I Have seen on other websites where other people have had allot of trouble finding it, VHT's website is under construction, so you cant order it directly from them, It wont be easy, but im sure ill find it eventually, Thanks for the tip on where to get clear coat.......

 

[Roz]

Summit and Jegs should have Nite Shades too. . .

 

[VNM PWRD]

ebay http://cgi.ebay.com/ebaymotors/VHT-...023822534QQcmdZViewItem?hash=item350023822534

 

[ccfeyh]

I Have seen on other websites where other people have had allot of trouble finding it, VHT's website is under construction, so you cant order it directly from them, It wont be easy, but im sure ill find it eventually, Thanks for the tip on where to get clear coat.......

I just went on EBay and found it, remember, use one coat, my first attempt was three coats, looked badass until I had the wife hit the brakes.

 

[Carlwalski]

Check with a local auto parts store. They can usually order it. VHT Nite Shade.

x 2

Yup, absolutely awesome stuff. I used it on my Jeep and highly recommend it. It's good because you can out the lights on and hardly tell it's their. I put 3 coats on and it's plenty dark. Spray less for lighter, spray more for darker, simple!


Carlwalski

 

[amtrucker22]

I have 3 or 4 coats on mine. I also have LED's so I know they will shine through.

 

[perk_1405]

did you guys sand it down the clear it? i tried on a set of old junk headlights i had and it was hard to keep it looking even when i was sanding, but it would probably be easier on something that was dark red and not clear.