specs on the Stank lowering springs for the RC's

[JTS VENOM PERFORMANCE]

got the word today

the stock springs have a rate of 760 lbs per inch

the 20% spring had a rate of 916 lbs per inch

and jsut to take some of the harshness out, will have them developed at 850lbs per inch if that is satisfactory to everyone.

and are at 1 1/4 inch lower than stock

not sure on the QC springs, they are working on them now, and will more than likely have them built to the same specs.
these i specified to be built at 1 1/2 inches lower than stock ,that way they can be worked to be a tad higher with a pad, or a tad lower by modifieying the spring.

thanks to everyone for the help guys:rock: :rock:

 

[HOT RAM]

Thanks for the info !

 

[spdrcrj]

That sounds like a great compromise with roadworthyness for those with less than perfect roads and increased performance when we do hit some nice pavement. For those of us only wanting the 1" drop, you adding the spring pads onto those packages, and the bit stiffer spring rate, sounds like a perfect package. Cant wait to get mine!!! :top:

 

[Dom426]

got the word today

the stock springs have a rate of 760 lbs per inch

the 20% spring had a rate of 916 lbs per inch

and jsut to take some of the harshness out, will have them developed at 850lbs per inch if that is satisfactory to everyone.

and are at 1 1/4 inch lower than stock

not sure on the QC springs, they are working on them now, and will more than likely have them built to the same specs.
these i specified to be built at 1 1/2 inches lower than stock ,that way they can be worked to be a tad higher with a pad, or a tad lower by modifieying the spring.

thanks to everyone for the help guys:rock: :rock:

is the rate on the qc same ..........might be more because those four door turds are slooooooooooooooooooooooooooow:dontknow: and heavy

 

[JTS VENOM PERFORMANCE]

is the rate on the qc same ..........might be more because those four door turds are slooooooooooooooooooooooooooow:dontknow: and heavy

LOLOL they are working on the QC springs now, will find out about the rates on those

 

[Dom426]

LOLOL they are working on the QC springs now, will find out about the rates on those

thanks stink