SRT-10 Frame

B

badblackhemi

New Member
Joined
May 9, 2007
Messages
48
Reaction score
0
Hey guy's, I have one quick question. I think I heard a while back that the srt had the same frame as the 2500? Is this true?
thanks,
-Kyle
 
SRT10VENOMOUS said:
yepers
Click to expand...
Awsome!! So they should be able to hold up to 800hp and 1400+ft/lbs of torque then!! If you get where i'm going with that...haha
 
ya should a couple guys are at 1200 hp tq rear wheel .. with no trouble thats 14XX something crank
 
haha, well the route i plan on going is going to yield me around 800rwhp and 1400+rwtq. All while getting 25+mpg.
 
badblackhemi said:
haha, well the route i plan on going is going to yield me around 800rwhp and 1400+rwtq. All while getting 25+mpg.
Click to expand...

are you removing the body leaving only the frame and drivers seat?..:dontknow:
 
haha, yes, mr. anderson got it right. i've been planning this swap for quite some time now. It does suck that i just found out HaulinAsp is planning the same setup, and def. has more knowledge than i do, BUT, i've been planning on it for a while and still plan on going through with it. The only diff. is, I plan on going with an auto, so maybe i can run some better times. :)
 
haha, i got you beat any way.........especially on traction....diesel + 4x4 =:eek:


good luck on the swap
 
are you going to buy a 3/4 ton turbo deisel? or build one,r/c or q/c,all r/c are long beds
 
I'm going to start with the srt-10. It's sad, but dealers can't give away a truck like that right now, so i can get a good deal on a trade in plus a little cash on a used srt-10. Then, i can just sell the viper motor and trans to put toward my diesel project. how much are those viper/6-speed combo's going for used?
 
hes gunna build a srt/C....if some one could make that a logo, that would be awsome
 
Yea, i was thinking about getting some SRT6 badges for it when its done. i'm sure ppl would be like WTF! when they saw it. My dad is also friends with Ken on that show Passtime and i was thinking about getting them to put the truck on the show when it's done and they come to/around the texas area.
 
Just to let you guys know I Have dibs on the name RATTLE SNAKE !!!! :rock: :rock: :rock:
 
Haha, i said Damn too, when i found out about your project. I thought i was the only one crazy enough to change the trademark motor in the srt-10. Hopefully i can just own the 1/4 mile time b/c i'll have an auto. lol, but you'll def. have top speed with that 5speed. Any chance of extending that sponsorship towards my build. haha j/k. I think i did see that you do porting on the heads to lower EGT's. I might get in contact with you for something along those lines, as well as your recommendations on a camshaft(i'll just let you know which compounds i go with). maybe i can work something out where we can both race on passtime. (don't know if you've ever seen it, comes on speed channel)
And i would never take your idea on a name. It is awsome though!! we'll have to think of a name for my project as well.
 
Last edited:
badblackhemi said:
Haha, i said Damn too, when i found out about your project. I thought i was the only one crazy enough to change the trademark motor in the srt-10. Hopefully i can just own the 1/4 mile time b/c i'll have an auto. lol, but you'll def. have top speed with that 5speed. Any chance of extending that sponsorship towards my build. haha j/k. I think i did see that you do porting on the heads to lower EGT's. I might get in contact with you for something along those lines, as well as your recommendations on a camshaft(i'll just let you know which compounds i go with). maybe i can work something out where we can both race on passtime. (don't know if you've ever seen it, comes on speed channel)
And i would never take your idea on a name. It is awsome though!! we'll have to think of a name for my project as well.
Click to expand...

Just let me know if you need anything for your Cummins, I have many contacts in the diesel world. I also have an awesome line of cams I work with that help spool big chargers faster and lower egts as well.

On the head porting just let me know......

It's all good.:rock:
 
HaulinAsp said:
Just let me know if you need anything for your Cummins, I have many contacts in the diesel world. I also have an awesome line of cams I work with that help spool big chargers faster and lower egts as well.

On the head porting just let me know......

It's all good.:rock:
Click to expand...
Thanks man! That's awsome!! i'll be sure to get in touch with you when the madness begins.
 
badblackhemi said:
Thanks man! That's awsome!! i'll be sure to get in touch with you when the madness begins.
Click to expand...
What are your plans- 12V? 24V? or CR? I have connections on either..... Let me know if ya need to locate one.;)
 
You must log in or register to reply here.

Latest posts

Support Us

Become A Supporting Member Today!

Click Here For Details

Random Media

IMG 1494
image
20140811 142013
DSCF3649
Back
Top