T56 Sequential Shifter

[AMS3]

I recently installed one. It was relatively simple to install 6-8 hours. Transmission didn't have to come out, a small section of the tunnel has to be trimmed off to fit.

Only issue I had, the lever supplied was too short or too long.

Looks good. Question: What's the gauge for that you have in the cubby hole?

 

[laNegra]

Looks good. Question: What's the gauge for that you have in the cubby hole?

That is the gear indicator

 

[96indyshaker]

How are the 2nd to 3rd shifts?

 

[rottenronnie]

this is the S1 shifter

ALMOST makes me want to switch to a Manual.

 

[laNegra]

How are the 2nd to 3rd shifts?

Srt-10 with a S1 shifter - YouTube

 

[Angelo621]

I recently installed one. It was relatively simple to install 6-8 hours. Transmission didn't have to come out, a small section of the tunnel has to be trimmed off to fit.

Only issue I had, the lever supplied was too short or too long.

I would like to install one in my 2004 SRT-10 SC. The installation instructions seem straight forward. What do you mean a small section of the tunnel had to be trimmed? Do you have pictures of that or could you please elaborate? Any other tips? I saw your video on YouTube and started searching the forums and found you. Appreciate your help.

 

[Wifey]

I have the Evansville Bike shop ( Boomer)one, which works well

EXACTLY!!! The best!

 

[Wifey]

ALMOST makes me want to switch to a Manual.

ALMOST! Only counts in horseshoes and hand grenades!