valve cover extentions

[Ironhead]

does anyone have a picture of a set of vlave cover extentions ,,,wondering if they would be high enough to reinstall my valve cover baffles ? or who makes taller vlave covers for the gen 3???

 

[SilvrSRT10]

does anyone have a picture of a set of vlave cover extentions ,,,wondering if they would be high enough to reinstall my valve cover baffles ? or who makes taller vlave covers for the gen 3???

Check this. Don't know what gen they are for. It says for all.

http://www.fasthemis.com/browseproducts/Dodge-Viper-Billet-Valve-Cover-Spacer.HTML

 

[blackviper]

Here you go.

 

[ZCx]

or a set of sheet metal valve covers????
:dontknow: :rock: :dontknow: :rock:

 

[Ironhead]

man for 399.00 damn

 

[JRSVIPR]

does anyone have a picture of a set of vlave cover extentions ,,,wondering if they would be high enough to reinstall my valve cover baffles ? or who makes taller vlave covers for the gen 3???

I think i remember Boomer had some taller valve covers?

 

[Ironhead]

I think i remember Boomer had some taller valve covers?

i looked on krc web site no go

 

[JRSVIPR]

i looked on krc web site no go

Gary aka Boomer X-Metal.

 

[Ironhead]

Gary aka Boomer X-Metal.

cant get to x-metals site seems to be down

 

[LoveThisTruck]

I have a set of aftermarker valve covers from Roe. Not sure if they're taller than stock or not:dontknow: I can get a measurement tomorrow if you want...

 

[Ironhead]

I have a set of aftermarker valve covers from Roe. Not sure if they're taller than stock or not:dontknow: I can get a measurement tomorrow if you want...

yes i do thanks

 

[JRSVIPR]

cant get to x-metals site seems to be down

Yeah, I guess there was some fall out here with him (heh-heh) do not think he will have anything to do with us. Some of the guys here have his number, Maybe they can hook you up?

 

[LoveThisTruck]

yes i do thanks

I'll call the shop tomorrow and have them measure.

Might want to keep an eye on this- http://www.viperalley.com/forum/viper-discussions-gen-i/77684-teaser-cf-valve-covers.html

 

[tinygiants]

Boomer was a poor vendor to many here. JMB has a proven track record here. Contact Justin, I bet he can fabricate up a set for you.

 

[rottenronnie]

does anyone have a picture of a set of vlave cover extentions ,,,wondering if they would be high enough to reinstall my valve cover baffles ? or who makes taller vlave covers for the gen 3???

This is what Jeff sells for the Strikers. A little more costly but a very nice piece.
They use the o.e.m. valve cover bolts that screw into a hollow (threaded) bolt at the top (flush) of the valve cover extensions.
Also Channeled and o-ringed on the bottom...so no gaskets and no leakie...

I just removed the tab from the dipstick tube and brazed it a bit higher so it could go back onto the same valve cover bolt. Also, watch the (passenger side) wiring harness as it now rubs on the valve cover. Easy fix there- just a couple of cable ties and it's good to go.

Ronnie

 

[JRSVIPR]

This is what Jeff sells for the Strikers. A little more costly but a very nice piece.
They use the o.e.m. valve cover bolts that screw into a hollow (threaded) bolt at the top (flush) of the valve cover extensions.

I just removed the tab from the dipstick tube and brazed it a bit higher than it was so it could go back onto the same valve cover bolt. Also, watch the (passenger side) wiring harness as it now rubs on the valve cover. Easy fix there- just a couple of cable ties and it's good to go.

Ronnie

That is a nice set-up.:rock:

 

[rottenronnie]

One more look from the inside...
And you can see what I mean about the threaded fasteners...

 

[Ironhead]

ya i looked on thier site no price listed ,,,so that means they are real fond of them

 

[rottenronnie]

ya i looked on thier site no price listed ,,,so that means they are real fond of them

$500 ish...

 

[HV SRT]

I have the same ones. I got mine from Kevin at Exotic Engine. $500 or $600 can't remember. I wrote to many checks when I did my build.