Want to build your motor?

[JTS VENOM PERFORMANCE]

There has been a ton of talk about pistons, rods, oiling issues and so forth.

guys dont go cheap! really ! you can do a real nice build and come out for a decent price

I cant say this enough~ IF YOU PLAN ON THIS GO WITH A BUILDER THAT HAS BUILT MANY VIPER ENGINES.

A guy that says he can , but does all makes is NOT the guy to go with

This guy in Hialea florida has great pricing, contact him , tell him I said to call and you get a built motor, forged pistons, rods, mains , oiling issuses taken care of all for only $7800.00

contact Larz at mesa engineering at 305-884-5368
this price is for the short block only, but does include billet caps, rods, pistons, align bore, parallel block, cam bearings and all, contact him for more info.

 

[moparracing]

There has been a ton of talk about pistons, rods, oiling issues and so forth.

guys dont go cheap! really ! you can do a real nice build and come out for a decent price

I cant say this enough~ IF YOU PLAN ON THIS GO WITH A BUILDER THAT HAS BUILT MANY VIPER ENGINES.

A guy that says he can , but does all makes is NOT the guy to go with

This guy in Hialea florida has great pricing, contact him , tell him I said to call and you get a built motor, forged pistons, rods, mains , oiling issuses taken care of all for only $7800.00

contact Larz at mesa engineering at 305-884-5368
this price is for the short block only, but does include billet caps, rods, pistons, align bore, parallel block, cam bearings and all, contact him for more info.

i hear what you're saying....... just wish that he wasn't on the other side of the country.....

 

[portlandsrt]

i hear what you're saying....... just wish that he wasn't on the other side of the country.....

2nd.....

 

[moparracing]

anyone got adeal like that on the west coast or better yet - the pacific northwest ?

 

[Scrambler1]

Guys that is a screaming deal on a built motor. Mine has a little more work done to it but cost 6 grand more. If you are looking for a motor to survive a Paxton or Roe that isn't turned crazy up or lots of spray this is a GREAT option.

 

[DevilDawg3097]

try west coast vipers.

 

[IH8CHVYS]

Guys that is a screaming deal on a built motor. Mine has a little more work done to it but cost 6 grand more. If you are looking for a motor to survive a Paxton or Roe that isn't turned crazy up or lots of spray this is a GREAT option.

Joe you got $7800 laying around you could send me?:dontknow:

 

[moparracing]

Guys that is a screaming deal on a built motor. Mine has a little more work done to it but cost 6 grand more. If you are looking for a motor to survive a Paxton or Roe that isn't turned crazy up or lots of spray this is a GREAT option.

what do you consider "lots of spray" ? 300 shot ?

 

[DevilDawg3097]

Question for you stinker or anyone who would know. Do the vipers with the Gen III motors have the same problem or did they just short change the Ram on internals?

 

[nycstev]

Question for you stinker or anyone who would know. Do the vipers with the Gen III motors have the same problem or did they just short change the Ram on internals?

Pretty sure they're forged.

 

[kyle's srt10]

Pretty sure they're forged.

Don't think so Steve

 

[nycstev]

Don't think so Steve

I know one of them wuz. Which one?

 

[FSTJACK]

try west coast vipers.

I would not take anything to West Coast Vipers, Jon Horton got to me for 16K. There is a thread here on the deal.

 

[kyle's srt10]

I know one of them wuz. Which one?

Someone will correct me if I'm wrong but I think 96'-99' vipers were forged

 

[nycstev]

Someone will correct me if I'm wrong but I think 96'-99' vipers were forged

Thats it!

 

[moparracing]

Someone will correct me if I'm wrong but I think 96'-99' vipers were forged

i think you're right.

 

[DevilDawg3097]

I would not take anything to West Coast Vipers, Jon Horton got to me for 16K. There is a thread here on the deal.

Thats good to know I don't really no about them except from the web. That is usefull info, anyone else we should have a post of where not to go. SO they are like hennessy?

 

[FSTJACK]

Pretty sure they're forged.

All Gen 3 motors are "Creme Puff" non forged.

They are the same car or truck.

 

[FSTJACK]

Thats good to know I don't really no about them except from the web. That is usefull info, anyone else we should have a post of where not to go. SO they are like hennessy?

As bad or worse in my opinion.........

 

[kyle's srt10]

So who's the closest builder in my area Tony?:dontknow:

I was going to use the guy that done my cam swap last year he's very good and I would trust him to put it together. The only thing is finding a machine shop in my area I could trust on a viper block

I wouldn't be sure to use to ship the block somewhere either:dontknow: