Whats left to do...

[Tooloe]

Thats relative cheap


I'm Fully Built Forged rods, pistons cam, nitrous ,bumped compression, K&N CAI ,SCT all your normal stuff MSD Wires and everything.... I'm looking for cheap upgrades that will help gain a few ponys... I'm not talking about 40 or 50 Rwhp but just a few.. small things i can do at the house.... I'd really like to find some under drive pulleys or some used headers.. i started school and now I'm broke but still want to tinker with the truck... to keep me entertained

please help! lol

 

[HOT RAM]

index the spark plugs
cat delete
all synthetic fluids
under drive pulleys
extrude hone the intake
port matching intake and exhaust


there is a thread somewhere on how to add an extra air inlet to the stock box and use a cone type filter

polish the throttle body or use a single blade

 

[Yellow venom]

HOT Ram has it summed up here,LOL, I am thinking of doing exactly that with my CAI,cutting a hole in the bottom of the box and running a tube with a cone on the end by the rad,to force air into the bottom of the airbox.Theres also the MSD coils when Stinker gets them too,Meth injection also.

 

[TNVIPER]

Painting your truck black will make it even faster.... .......but if you cant afford that then cut the extra hole as mention in the posts above and replace the panel filter with a cone type K&N (link below)..

http://www.srtconnection.com/forums/showthread.php?t=15596



..

 

[Venom Power]

Where could we get some good underdrive pulleys?

 

[TNVIPER]

Where could we get some good underdrive pulleys?

I think Stinker can get them..

 

[ViperPunk]

how much of a difference would underdrive pulleys make?

 

[ZCx]

Quality wires or Stinker's 1400 wires. the coils as soon as they are ready.

BBK TB if & when its ready.

one of them Spec clutchs would be sweet

complete aluminum body or frame rails?????

:rock: :rock: :rock: :burnout: :burnout: :burnout:

 

[TheMoparConnection]

i have the underdrive pulley, cant really tell you how much of a difference it made because I did the rebuild at the same time

 

[ViperPunk]

my buddy said he gained about 10 hoses in his stang so it is probably around 10-15 im guessing

 

[1qksrt]

index the spark plugs
cat delete
all synthetic fluids
under drive pulleys
extrude hone the intake
port matching intake and exhaust


there is a thread somewhere on how to add an extra air inlet to the stock box and use a cone type filter

polish the throttle body or use a single blade

:dito: I Agree with Hot Ram,Plus since I see your in Texas,I would also recommend water wetter and distilled water for your cooling system! (aprox 20 bucks total)
Have your S.C.T. dyno tuned after your mods are installed.

 

[Hatedonmostly]

my buddy said he gained about 10 hoses in his stang so it is probably around 10-15 im guessing

Na it's less than that, Think it's around 7whp and it cost around 470.00 from DC kinda not worth it to me.

 

[TheMoparConnection]

Na it's less than that, Think it's around 7whp and it cost around 470.00 from DC kinda not worth it to me.

that would be my guess too... i have them for 400.00 shipped

 

[Hatedonmostly]

What else you sell, Whats the site?

 

[Tooloe]

index the spark plugs
cat delete-DONE
all synthetic fluids-DONE
under drive pulleys-I want Some
extrude hone the intake- DONE
port matching intake and exhaust-DONE


there is a thread somewhere on how to add an extra air inlet to the stock box and use a cone type filter

polish the throttle body or use a single blade

i also run a ROE ThrottleBody

 

[BlackMamba50]

I totally agree with indexing the spark plugs.
http://www.summitracing.com/search/?keyword=spark plugs index&dds=1

index the spark plugs
cat delete
all synthetic fluids
under drive pulleys
extrude hone the intake
port matching intake and exhaust


there is a thread somewhere on how to add an extra air inlet to the stock box and use a cone type filter

polish the throttle body or use a single blade

 

[kyle's srt10]

You could do some shaft mounted rockers:dontknow: But there not cheap