As the title says,
Who is interested in a Triangulated 4 link and Custom lower a arms
Kit would consist of Front A Arms lowered custom so you can still retain full travel of front suspension but but have your truck slammed,
Rear would consist of a Triangulated 4 link, So you would ditch your leaf springs and old suspension set up. The Triangulated part of the 4 link would also give you amazing cornering ability vs a straight 4 link where that goes out the window.
Kit would be made to lower you truck and fix all suspension problems
along with a small c notch option if you like to get even lower - only if you want to go lower- Coil over shocks would be used ..
Kit will be designed to bolt it, but is highly recommended you weld in as welds dont come lose overtime " just ask jerry about that" So you could just bolt it up or you can weld it in so an option for those who dont like welding on there truck..
This is basically the kit i am having made for myself but mine will be to drop the truck on the ground so it will be cnotched and laying as close to the gnd as possible with out getting things binding in the fender wells.
Our estimated potential to drop the truck would be another 3 inches on the front and 4 on the rear over the " jtsvp extream kit" already offers... But that would be with a minor cut into the frame not a full cnotch just a lil cut out for the axel.. again this is estimated we will have to see final numbers when done.. so overall from factory height will be close to 5 front 7 rear for a rc
ok and cost ball park would be
Front Arms 700ish
Rear 4 link set up 2k ish..
no solid numbers yet but thats a ballpark could be more or less..
Who is interested in a Triangulated 4 link and Custom lower a arms
Kit would consist of Front A Arms lowered custom so you can still retain full travel of front suspension but but have your truck slammed,
Rear would consist of a Triangulated 4 link, So you would ditch your leaf springs and old suspension set up. The Triangulated part of the 4 link would also give you amazing cornering ability vs a straight 4 link where that goes out the window.
Kit would be made to lower you truck and fix all suspension problems
along with a small c notch option if you like to get even lower - only if you want to go lower- Coil over shocks would be used ..
Kit will be designed to bolt it, but is highly recommended you weld in as welds dont come lose overtime " just ask jerry about that" So you could just bolt it up or you can weld it in so an option for those who dont like welding on there truck..
This is basically the kit i am having made for myself but mine will be to drop the truck on the ground so it will be cnotched and laying as close to the gnd as possible with out getting things binding in the fender wells.
Our estimated potential to drop the truck would be another 3 inches on the front and 4 on the rear over the " jtsvp extream kit" already offers... But that would be with a minor cut into the frame not a full cnotch just a lil cut out for the axel.. again this is estimated we will have to see final numbers when done.. so overall from factory height will be close to 5 front 7 rear for a rc
ok and cost ball park would be
Front Arms 700ish
Rear 4 link set up 2k ish..
no solid numbers yet but thats a ballpark could be more or less..
Last edited:
