working on ps lines

[JTS VENOM PERFORMANCE]

guys I promise I am working on the ps lines, but they use a metric fitting that goodridge dont normally stock.

we got the adapters in , they fit, well joanne said theya did, but I will doubley check

but I am gong up tommorrow and ssee aobut getting the first set mocked up.

but i will keep everyone posted on the progress

 

[Prof]

Kewl.

 

[breederofkoi]

guys I promise I am working on the ps lines, but they use a metric fitting that goodridge dont normally stock.

we got the adapters in , they fit, well joanne said theya did, but I will doubley check

but I am gong up tommorrow and ssee aobut getting the first set mocked up.

but i will keep everyone posted on the progress

Try finding a local hydraulic shop by you, they should be able to match up the fittings you need without having to use adapters.. I think the PARKER brand of fittings has some metric stuff.

 

[blackviper]

Thanks for the update. I'll take the first set along with the oil lines.

 

[JTS VENOM PERFORMANCE]

Try finding a local hydraulic shop by you, they should be able to match up the fittings you need without having to use adapters.. I think the PARKER brand of fittings has some metric stuff.

well the prob is bo I can find others to do the lines

but if i can get goodridge to do the lines I can do the in lifetime warranty

 

[dragon]

nice any idea on price?

 

[JTS VENOM PERFORMANCE]

at this moment bo, around $225, which to me is high, but I guess taking in to consideration the warranty not bad.

i have tried to get them to use the 811 hose, which is the same as the oil lines to keep down price and use the less expensive fittings, but they jsut dont want to , and sugggest using there hi pressure hose, and the fittings will be a very nice stainless steel fitting

 

[breederofkoi]

at this moment bo, around $225, which to me is high, but I guess taking in to consideration the warranty not bad.

i have tried to get them to use the 811 hose, which is the same as the oil lines to keep down price and use the less expensive fittings, but they jsut dont want to , and sugggest using there hi pressure hose, and the fittings will be a very nice stainless steel fitting

Tony, what kinda pressure rating does the hose they want to use have??? by the way, just thought of another supplier "GATES"

 

[JTS VENOM PERFORMANCE]

i think 4500psi

 

[Chuck B]

A kit will be nice when done. I ended up obtaining the factory insert off an older Saginaw pump then welding on an AN fitting. Our insert doesn't leave enough metal for welding....at least for this backyard mechanic. If you read the factory service manual it will tell you removal of the insert will result in having to replace the factory power steering pump. I can say with confidence that this is not true.

 

[blackviper]

Tony, when do you think they will be available? I got about 3 to 4 weeks before the reassembly begins.

 

[rottenronnie]

guys I promise I am working on the ps lines, but they use a metric fitting that goodridge dont normally stock.

we got the adapters in , they fit, well joanne said theya did, but I will doubley check

but I am gong up tommorrow and ssee aobut getting the first set mocked up.

but i will keep everyone posted on the progress

You the man Homer!!!:rock:

 

[JTS VENOM PERFORMANCE]

I stopped by today and all the fittings were not in quite yet, but are supposed to be therre monday

but thanks to ronnie here is you pressure answers.

the 811 hose I wanted to use to keep the price down has these pressures

-6an line working of 1180psi burst 4700
-8an line working of 1030psi burst 4120

problem is our ps psi can reach upwards of 1400+psi

the 600 smooth bore series is basically like a large brake line hose

-6an working 4714psi burst 18855psi
-8an working 3626psi burst 14504psi

so as you can see the 600 series is much more bullet proof, plus will also have stainless steel ends, crimped, with an an fitting to fit into the housings

 

[ZCx]

600:rock: :rock: :rock:

 

[rottenronnie]

600 (x2) ............

The "install-and-foegeddabowditt" option is a pretty appealing option to me...

... just my 2 cents.

Thanks again for all your efforts Tony Mahn!!

Ronnie

 

[JTS VENOM PERFORMANCE]

not a prob , I jsut hope goodridge gets there act straight and gets things back to normal, me and the guy are on a really good friendship level ,but i lit his ass up a little today

so i hope by tuesday I will be able to send out a set to be checked , I hope, but knowing how things have gone..........probably a week later:argh: