info

[Mantatsafasttruck]

What's a good inexpensive supercharger

 

[JTS VENOM PERFORMANCE]

Used Electric Supercharger Fan Intake Charger Filter and Wiring Kit Universal! | eBay


complete with bov

 

[SRT2SLOW]

e-Racing :: OFFICIAL SITE :: The e-RAM Electric Supercharger from e-Racing Motorsports

 

[JTS VENOM PERFORMANCE]

inexpensive and performance dont go together unless you own a ford, or chevy, you sometimes can find a blower on here used for $3500 but may spend another 2k finishing it up. or new for 7k plus by the time your done

 

[wesalbert]

He said "good"

















Then again, he also said inexpensive.

 

[505'sFastestViper.]

What's a good inexpensive supercharger

Well since we have a bunch of guys here that choose to joke around when a forum member asks a serious question ill take the time to answer your question...

A few options

1; Paxton supercharger not cheap new but you can find them used for a good deal

2; Roe supercharger while they look cool they are the worst performing charger and not cheap new

3; Procharger setup JMB Performance & Powdercoat, LLC. an awesome vendor on here!!!! as inexpensive as the paxton when its all said and done

hope you figure out what your wanting to do

 

[RAMDUDE]

Well since we have a bunch of guys here that choose to joke around when a forum member asks a serious question ill take the time to answer your question...

A few options

1; Paxton supercharger not cheap new but you can find them used for a good deal

2; Roe supercharger while they look cool they are the worst performing charger and not cheap new

3; Procharger setup JMB Performance & Powdercoat, LLC. an awesome vendor on here!!!! as inexpensive as the paxton when its all said and done

hope you figure out what your wanting to do

I agree Procharger is the best, my friend's buddy runs 7's with his foxbody using a procharger.

 

[SRT2SLOW]

How much more is the procharger over the paxton?

 

[JTS VENOM PERFORMANCE]

He said "good"

















Then again, he also said inexpensive.

inexpensive is a broad term for sure

 

[rare03srt10]

JMB kit looks faaaaancy too

VERY NICE KIT

 

[Geodriller]

Hell yeah it does

 

[505'sFastestViper.]

How much more is the procharger over the paxton?

i think by the time its all said and done they are real close to the same

 

[Jigsaw89]

IMO, the JMB kit looks killer and has performance #'s that are hard to beat for the time and $ involved.

 

[Yellow venom]

I dont think you can go wrong with Justin's Pro Charger kit, it performs , looks great and he can customize it to your liking( colours) of your choice before you get it! Put it in and done.

 

[VIPER]

Description:

The first and only Do it Yourself 1000+ WHP

kit on the market for the SRT-10 Ram. Available

in pieces for those that want to spec out their

own parts or buy the entire kit and be ready to

go. Requires keyed crankshaft with upgraded Balancer.

Will not clear stock fan assembly. Not for stock

motors!!

Base kit includes:
ATI Procharger Polished F2 Blower (2700 CFM!!)
Billet 6061T6 Bracket System
2" Cog Pulley Drive system with crank, blower, and

idler pulleys, crank adapter, and belt.
All Stainless Hardware
Powdercoated finish on all brackets and spacers
Installation instructions included



$6,500


then another $3500

Front Mount Intercooler Setup:
-Enormous 1500+ CFM intercooler
-All Intercooler piping from Supercharger and to throttle body with powdercoat
-Tial BOV
-T-bolt clamps
-Silicone couplers
-Must send in your condensor for modifications.
-Modifications required to front bumper assembly
-All hardware and installation instructions
$2600

Electric Radiator Fan Assembly
-Huge Electric Fan
-Custom powdercoated shroud
-Thermostat/relay assembly with SRT10 specific wiring harness
-All hardware and installation instructions
$700

Air Intake Assembly
-Custom powdercoated heat shield
-High flow air filter
-All hardware and installation instructions
$199


$10,000 - super charger


pluse misc items and labor, thats not encluded the cost of the engine build

$10,000 + engine build

 

[fastestbrickonearth]

Everything viper said plus you are going to need more fuel and some tuning time.

 

[505'sFastestViper.]

he has a smaller kit avaible to

 

[505'sFastestViper.]

A Supercharger setup for stock or modified engines that
leaves room to grow. Designed to fill the gap between the
smaller superchargers on the market that are maxing out
around 700whp or less and the larger JMB F2 Setup that
requires a built motor. Featuring Prochargers F1-C model,
coming in at 1850CFM, this supercharger has the flexibility
to produce 600-950+WHP on your SRT-10 RAM and is the
only supercharger system on the market proven to do so.
The kit is offered in two forms, dedicated 8 rib drive (good
to approximately 10-12 psi depending on engine combination)
or 50mm Cog drive (good to 16+ psi depending on engine setup).

Base Kit Includes:
ATI Procharger Polished F1-C Blower
Billet 6061T6 Bracket System
8 Rib dedicated drive system with crank, blower, and idler pulleys,
crank adapter, and belt.
All Stainless Hardware
Powdercoated finish on all brackets and spacers
Huge 4.5" thick Garrett GT Core intercooler
All Intercooler piping from Supercharger and to throttle body with
powdercoat
Tial BOV
T-bolt clamps
Silicone couplers
Air Intake Assembly with custom powdercoated heat shield
High flow air filter
Must send in your condensor for modifications.
Installation instructions included
Pulley sizes tailored to each combination

Price and Options: $7000 base price

 

[505'sFastestViper.]

And Viper is a

 

[VIPER]

And Viper is a

i am - i perfer Tony "JTSVP" over Justin, just my preference just like your Justin's "JMB" boy toy

i am pleased with Tony and his work/craftsmanship - does it really matter

i was just pointing out that there is ALOT more you need with the JMB kit then you might think - being realistic, not just saying you need this and this is wat it will cost you

going FI any FI's app is alot of $$ it not all back and white