Anyone interested in a gen 4 conversion

Discussion in 'Performance Mods' started by SRT10VENOMOUS, Feb 16, 2011.

  1. Definitly interested in getting this set up

    45 vote(s)
    78.9%
  2. Not so much thank you

    12 vote(s)
    21.1%
  1. SRTRICK

    SRTRICK New Member

    Messages:
    29
    Likes Received:
    0
    Joined:
    Jun 30, 2009
    Location:
    H-Town
    Did we ever get any final numbers for this??:dontknow:
     
  2. SRT10VENOMOUS

    SRT10VENOMOUS 1800HP Club. And climbing Supporting Member

    Messages:
    6,022
    Likes Received:
    9
    Joined:
    May 18, 2006
    Location:
    Vancover BC Canada
    should have some by end of the week... ordered a custom clutch," carbon fiber/Kevlar" its been a while coming expect to see it soon
     
  3. BigC

    BigC New Member Supporting Member

    Messages:
    19
    Likes Received:
    0
    Joined:
    Dec 5, 2007
    Any Update?

    How is this build coming along?
     
  4. Yellow venom

    Yellow venom Boosted Venom Supporting Member

    Messages:
    7,800
    Likes Received:
    0
    Joined:
    Jul 28, 2007
    Location:
    Edmonton,Alberta,Canada
    Did ya get your clutch put and and back to the dyno yet?
     
  5. SRT10VENOMOUS

    SRT10VENOMOUS 1800HP Club. And climbing Supporting Member

    Messages:
    6,022
    Likes Received:
    9
    Joined:
    May 18, 2006
    Location:
    Vancover BC Canada
    we were up as high as 610rwhp, at 18% drivetrain loss thats in the 720 hp range, and ran into some trani issues.. Now re doing the trani.. We did some extensive tuning, some fuel system mods and several other things to tweek this beast.. I think its pretty much maxed out on a NA system that the Viper Engine provides..

    I dont know what to do with this thing, seams that the power is tearing up a lot of the stock drivetrain,
    There are several guys interested in this set up that are at our shop, so I might pull it and sell it to one of these guys who has more time to play with the braking parts that this hp is causing.. Maybe its just my truck but I just want to drive the dam thing lol.. So who knows maybe ill return her back to a stock head port and polish and just drive it.. Sucks when it sits broken for months on end..

    So who knows.. Will let ya know how it turns out..


    Will try to get a final dyno number on this thing when the trani is fixed up..
     
    Last edited: Jul 4, 2011
  6. SRT10VENOMOUS

    SRT10VENOMOUS 1800HP Club. And climbing Supporting Member

    Messages:
    6,022
    Likes Received:
    9
    Joined:
    May 18, 2006
    Location:
    Vancover BC Canada
    Now to get up to this hp the cost has risen quite a bit due to all the other crap we had to do to get to max power, its probably gonna be another 5k higher than we expected to get to this hp...

    Starting to get a lil pricy for my blood, before you know it you have a 1000 here and an 1000 there and 1000 here and 1000 there and your in much deeper than you thought.. So I'm not sure on the total anymore but Id say add 5k to the previous price whatever that was to get it to this level..

    But if you could get someone to produce some valve covers for ya that were not insanely expensive like the stockers, along with the intake " maybe a carbon fiber intake " there could be 3k off the top of the price.. Or if you provide all your own gen 4 components from a wrecked car or something would be ideal. Would be good if you could get the gen 4 trani as well.. which is designed to handle the large hp.. could save a lot of cash doin that... That is if you could find one..
     
  7. ARRESTmeRed04

    ARRESTmeRed04 Active Member Supporting Member

    Messages:
    5,882
    Likes Received:
    2
    Joined:
    Nov 5, 2007
    Location:
    central texas
    What is the issue with the trans? There don't seem to be a lot of t56 issues that we hear about
     
  8. SRT10VENOMOUS

    SRT10VENOMOUS 1800HP Club. And climbing Supporting Member

    Messages:
    6,022
    Likes Received:
    9
    Joined:
    May 18, 2006
    Location:
    Vancover BC Canada

    was messing around with the beast and in 5th gear put her to the pin and that was it 5th gear is gone... Apparently they say 5th and 6th are not that strong,, But I have no idea with tranis thats what I was told..
     
  9. ARRESTmeRed04

    ARRESTmeRed04 Active Member Supporting Member

    Messages:
    5,882
    Likes Received:
    2
    Joined:
    Nov 5, 2007
    Location:
    central texas
    That would make sense as they are over drive gears, the 610rwhp you got on the dyno was in 4th gear though correct?
     
  10. SRT10VENOMOUS

    SRT10VENOMOUS 1800HP Club. And climbing Supporting Member

    Messages:
    6,022
    Likes Received:
    9
    Joined:
    May 18, 2006
    Location:
    Vancover BC Canada
    yes that was on 4th gear,,

    This dyno is a crazzy dyno it has video screens of the track and road coarse and shit, so thats how we messed it up just screwing around
     
  11. rottenronnie

    rottenronnie Well-Known Member Supporting Member

    Messages:
    4,178
    Likes Received:
    2,153
    Joined:
    Jul 4, 2006
    Location:
    Calgary, Alberta
    It would have been nice if the price-point was lower for the Gen IV conversion but it did seem like an awful lot of equipment for ten grand. However, the good stuff is rarely cheap!

    As the Gen IV and Striker cylinder head are very close in capabilities, it doesn't surprise me that the performance numbers are so close to each other.

    Who knows, if the Strikers don't return soon, this Gen IV conversion kit might be one of the few remaining options for the old Gen IIIs.

    Ronnie
     
    Last edited: Jul 5, 2011
  12. ZCx

    ZCx Active Member Supporting Member

    Messages:
    9,803
    Likes Received:
    19
    Joined:
    Sep 13, 2007
    Location:
    Big D
    what would it take to get the Strikers available????
     
  13. rottenronnie

    rottenronnie Well-Known Member Supporting Member

    Messages:
    4,178
    Likes Received:
    2,153
    Joined:
    Jul 4, 2006
    Location:
    Calgary, Alberta
    Someone to buy JM Cylinder Heads.
     
  14. Yellow venom

    Yellow venom Boosted Venom Supporting Member

    Messages:
    7,800
    Likes Received:
    0
    Joined:
    Jul 28, 2007
    Location:
    Edmonton,Alberta,Canada
    When do u get possession Ron? :). Lol
     
  15. rottenronnie

    rottenronnie Well-Known Member Supporting Member

    Messages:
    4,178
    Likes Received:
    2,153
    Joined:
    Jul 4, 2006
    Location:
    Calgary, Alberta

    PM sent.