Fastest ???

[fastestbrickonearth]

Do you know what his mods are ?!? And/or what was done to his truck ?

Video link ?!? Ne one ?!?

It seems like he had a run that was 11.03. It was a 05 qc Motor has Billet Mains, rods, pistons, Striker heads, jessel rockers, Vec II and Roe SC. Indy Cylinder Head (Indy Cylinder Heads) built the motor. It also has bellanger headers and magnaflow exhaust.

The truck uses a top mount twin screw supercharger. I have an 8,000 dollar all billet tranny. It has a piece driveshaft. I replaced the rear and upgraded all of the parts. It currently has a 4.56 gear. It has aftermarket wilwood brakes. The stock rear has to be totally replaced in order for a 15" rim to be used. When racing, I used a Hoosier 10.5" outlaw tire, works awesome.

 

[fastestbrickonearth]

This was taken from a thread on viper alley from him selling the truck

 

[eddie102870]

Motor let got on 400's shortly after the run because i bought the Roe from him.

 

[caveman]

This was taken from a thread on viper alley from him selling the truck

Have a link to that thread?

Motor let got on 400's shortly after the run because i bought the Roe from him.

Why did it let go?

 

[fastestbrickonearth]

Have a link to that thread?



Why did it let go?

My turn, feeler for SC Striker head 05 SRT - Viper Alley - Dodge Viper Forum

Try that bud. And he had a video up where he went 11.03 but it is gone. He did say it should run 10.70 on spray but I don't know if he ever did.

 

[FATJACK]

jack never runs the 1/4 mile but even then he still did no have the fastest 1/8 mile n20 time either

:reddy::reddy::reddy::reddy::reddy::reddy::reddy:

In my mind I did.:aetsch:

 

[eddie102870]

Have a link to that thread?



Why did it let go?

Oil pump failure if im not mistaken

 

[noid]

I see how all you haters leave me off of this list. You know who you are:fight:

The fastest NA QC is me. 12.1 for a NA QC with no internal work done.

 

[caveman]

I see how all you haters leave me off of this list. You know who you are:fight:

The fastest NA QC is me. 12.1 for a NA QC with no internal work done.

Details Homie!? What is done to your truck?

 

[noid]

Mopar headers, 3 back exhaust, caltracs, fastman throttle body, Volant intake, SCT from DC Performance and M&H 390 DR's

 

[caveman]

Mopar headers, 3 back exhaust, caltracs, fastman throttle body, Volant intake, SCT from DC Performance and M&H 390 DR's

That's fast, brother! What was your 60ft?

 

[noid]

That's fast, brother! What was your 60ft?

Forgot the 2400 stall torque converter.

60 foot was 1.768

 

[rare03srt10]

if i can ever get my POS running right and out to the track im sure it should make some decent passes being that my SRT10engine is sittin in a normal ram1500 frame lol. Anyone know roughly what mine should weigh? Ive been told that the 8.3L is over 200 pounds lighter then the stock 5.9 v8 with cast iron block was too...

 

[phxpoolguy]

Mopar headers, 3 back exhaust, caltracs, fastman throttle body, Volant intake, SCT from DC Performance and M&H 390 DR's

Am I reading it wrong or are you saying a 12.1 with just those bolt ons on a QC?

 

[LETHAL HEMI]

A average quad cab ram weighs 5100 w/o driver

Sent from my SGH-T959V using Tapatalk

 

[caveman]

Am I reading it wrong or are you saying a 12.1 with just those bolt ons on a QC?

You are reading it right. Interesting, huh? :alberteinstein:

 

[noid]

Am I reading it wrong or are you saying a 12.1 with just those bolt ons on a QC?

You are reading it right. Interesting, huh? :alberteinstein:

Am I detecting doubt from you guys?:dontknow:

 

[SrtBrad]

Am I detecting doubt from you guys?:dontknow:

I will personally guarantee that this fool is saying it straight. No BS!!!

 

[SrtBrad]

Is that this truck?

Worlds 2nd fastest Dodge Ram SRT-10 - YouTube

No that's nowwhats truck

Didn't DC Performanco build that truck?

That Truck is Mike Brady's old truck that is currently owned by Ryan (Tidnab). The truck ran a 10.73 in the 1/4 @125 with a Paxton on a 350 progressive shot of N2O with Chris Jensen tuning the truck in between runs. Yes this truck is DC Performance's build and is not forgotten. Ryan has some plans for it soon!!!!!

 

[VIPER]

Am I detecting doubt from you guys?:dontknow:

these truck can run 12's in the 1/4 mile with VERY limited mod's.....

out of the box with a shifter and slicks 12.7 with a RC - theres just alot of nay'sayer's that cant drive IMHO