I got a couple hours today to work on the truck. the last thing I need to put is the water jug for the intercooler system. Where do u guys have it mounted ? The instructions that come with the kit suck ass
paxton guys
- Thread starter SRT2SLOW
- Start date
Privatetoe82
Full Access Member
Just strap it on anywhere, and lets take that thing for a ride man. 
Goes mounted to the chassis on the passenger side.
Mine is tucked under the passenger fender towards the front (mostly hidden)
BAD SNAKE
Full Access Member
I say put it where you want to, Mine was mounted on the out board side of the passenger side frame rail
Thanks guys. I made some brackets and mounted it behind the fog light. U can see it at all from the top. I'm going to have her driving by tonight
Privatetoe82
Full Access Member
Cant wait to check it out, and go for a ride.
She runs pretty fucking good but all I saw was 3-4lbs of boost . I only went to 3rd gear.
fastestbrickonearth
Full Access Member
Sweet man. Who wrote your tune?
RagunCajun
Full Access Member
Wait, you are running it hard without a proper tune? If it's an email tune you should datalog to make sure everything is ok.
Torrie sent me a tune and I have a wideband in the truck. The af never went over 11
VENOMOUS1 RACING
Has Left the Room - Banned from VTCOA!
E, make sure the belt is tight as it will want to slip if not. Takes a bit of pressure! Check all of your connections as well for leaks. Make sure boost gauge has no leaks as well. If all above fails do you have the correct oil in it? Could be time for it to be rebuilt? Congrats on the newfound power though. How did the few pounds of boost feel?:burnout:
Yup. What Scott said. You should see 7lbs at Around 5000 rpm and up. No matter what gear ur in
NSDQ
Full Access Member
Santeen, is it weird to see your kit on other trucks now lol. I wish I could have gone ahead with this project but timing just wasn't right. Glad E bought it and got it put in as fast as he has.
whats that mean?
Dam. I didn't know it was on that many trucks. If she treats me good I'll keep her.
phxpoolguy
Full Access Member
It was almost on mine as well.
. I had my six speed conversion I really needed to get done though. Glad you got it working E.
Support Us
Become A Supporting Member Today!
