It's an extremely simple job ... EXCEPT getting to the outermost bolt to remove the headlight assembly. With our bumper covers, it is not easy, even with decent extensions. if I had an extra set of hands, it would have helped, certainly.
I made sure to cover the bumper with a microfiber towel and press down on bumper cover in order to get socket in there to access the bolt. Going back in was difficult too b/c the bolt in the socket succumbs to gravity and is thus very hard to line up (bolt hole is a good 6" behind the bumper cover).
A 5 min job took 20 mins. oh well.
What I should have done was replace the headlight bulb as well while I was in there.
I made sure to cover the bumper with a microfiber towel and press down on bumper cover in order to get socket in there to access the bolt. Going back in was difficult too b/c the bolt in the socket succumbs to gravity and is thus very hard to line up (bolt hole is a good 6" behind the bumper cover).
A 5 min job took 20 mins. oh well.
What I should have done was replace the headlight bulb as well while I was in there.