BlackKnight
Full Access Member
After doing some research on other ways to power my valentine 1, I decided to go with the Invisicord (Invisicord Products Home Page). I went with the #I01EVB with an 8in length, added fuse and the standard connector type. Paid just over $20 including shipping. Really easy to install and I've attached pics showing where I placed the connectors into the wire harness that goes into the back of the rearview mirror.
The power (red) wire went next to the pink wire with the blue stripe and the ground wire (black) went next to the black wire which is next to the pink power wire. This way, the V1 only powers up when the car is running or the key is in the accessory position.
The power (red) wire went next to the pink wire with the blue stripe and the ground wire (black) went next to the black wire which is next to the pink power wire. This way, the V1 only powers up when the car is running or the key is in the accessory position.