Search results

Thanks for your input so far. Which sensor do you mean? I left the LDP electrical plugged in and removed the vacuum line coming from the throttle body. I closed this line towards the engine. I don`t get the fault on every cold start now, but again got the code yesterday. Since I live in...

But there will be an error code if you remove it? I don`t want to have the CEL on...

Hi folks, I bought a SRT-10 with a taped CEL. The reason for the preowner to tape the check engine light is fault P1494. I always get this fault stored after a cold start. I followed the procedure to solve the fault, but I didn`t suceed yet. Gas cap seems to be ok, I can`t smell fuel or...

Yes, I just pulled them with a zip-tie to the heater lines, should be ok now...

Hi Folks, I bought a "used" SRT-10 and I`m worriing if theres a clamp or something of the engine wiring missing. The loom is very close to the exhaust header on the right side. It has a heatshield, but I`m not sure if it really belongs to this position?!

Yes, it is working. After I have new plugs put in (one of them was cracked), I will check for fault codes again. Maybe I need your help again...

I just solved this problem. There was a black tape on the backside of the display. Seems like the pre-owner preferred to shut sown CEL light instead of searching for faults :-) Thanks for your help guys.

Thank you...test was successful. But check engine light is definitely not working...everything else is working fine.

Thanks for help. Have this fault code stored...but there is no check engine light :-( The light should also work when turning the key...but it doesn`t

Well CEL should work when ignition is on, but engine not running. There was also a fault code because of a damaged spark plug, but there was no light. So it`s definitely not working. I just bought the car, maybe someone manipulated the light, but there seems to be no bulb to simply pull off...

Thanks for your input. I already checked ECU pinouts. But I couldn`t find a special CEL signal. Does anybody have wiring diagrams of the dash (tacho) unit?

Hello folks, my check engine light (CEL) is not working at all. With ignition turned on only, it`s also not working. I just removed the dash, to check for a broken bulb, but I can`t find the bulb. Is it an LED? How could I trigger it to test it? I already checked ECU but I could not find the...