2/5" lowering kit

[ViperPete]

hey all

About 80% done installing the urethane everything and 2/5" lowering kit

How much material do I have to remove from the front sway bar end links? I have heard an inch to an inch and a half.

Also,

Does anyone have detailed instructions on how to install the belltech rear swaybar? Like where to drill and ect?

Want to finish tonight!

thanks!

 

[hawk02]

I think jmb has the proper end links instead of cutting yours, not sure on the sway bar though.

 

[ViperPete]

I think jmb has the proper end links instead of cutting yours, not sure on the sway bar though.

That's all JMB does. Cuts and welds factory end links.

 

[ViperPete]

Just got the info I needed from Tony, thanks tho.

 

[Overkillsrt]

Do you need to cut the end links after doing the 2/5 drop

 

[ViperPete]

Do you need to cut the end links after doing the 2/5 drop

Yes,

In order for the sway bars to function correctly the ends need to be parallel with the ground. With a lowering kit they stick upward and are not effective.

 

[Reaper]

Yes,

In order for the sway bars to function correctly the ends need to be parallel with the ground. With a lowering kit they stick upward and are not effective.

i ran for a couple weeks after lowering my truck before correcting the end links. I didnt realize i need to fix them at first, slipped my mind. And what a difference it makes when you have the correct end links length :rock: