Boomer lowering Kit Question...

[PDR-GUY]

eventually i will make a kit that can relocate the tierod end to keep them at the same angle as the control arm. until then we have a urethane spacer that goes under the springs to lift the front end up a bit to control the bumpsteer, and instructions and the kit to adjust the rear height so you can level the ride height to your preference. the 06's are critical onm alignment, so make sure you give your self enough adjustment room on control arm

Gary, I was never informed of any urethane spacer:dontknow:
How far does the front need to come up to take care of this problem?

 

[JTS VENOM PERFORMANCE]

Gary I can give you the part # of the bump steer kit I used and made work , hollar if ya need it, You could remachine it alot easier than I could

 

[BOOMER]

Gary I can give you the part # of the bump steer kit I used and made work , hollar if ya need it, You could remachine it alot easier than I could

hell yea, pm me, my stinky brotha

 

[Chuck B]

Installing SC?! Need anymore help? Heck, I can even a turn a wrench or two!

 

[azpyroguy]

Installing SC?! Need anymore help? Heck, I can even a turn a wrench or two!

I will be happy to accept any help anyone wishes to provide.. I am supplying the pizza and beer!!

 

[HOT RAM]

" and instructions and the kit to adjust the rear height so you can level the ride height to your preference. "
Is this just for the 06 , or the 04-05's as well ? I would like mine a bit lower in the rear (about 1")

 

[Azmotorhead]

Put me down for being there AZPyroguy.
PM me a mapquest to where its going down.
Phil the Gimp

 

[BOOMER]

Gary, I was never informed of any urethane spacer:dontknow:
How far does the front need to come up to take care of this problem?

its only for the 06 quad cab, not the rc

 

[BOOMER]

" and instructions and the kit to adjust the rear height so you can level the ride height to your preference. "
Is this just for the 06 , or the 04-05's as well ? I would like mine a bit lower in the rear (about 1")

qc's only

 

[PDR-GUY]

its only for the 06 quad cab, not the rc

I understand, Thanks

 

[BOOMER]

I understand, Thanks

cool post some pics of the planes you build.

 

[eddie102870]

you aint got time

 

[BOOMER]

you aint got time

good point.......