Complete braided brake line kit, and oil lines

[JTS VENOM PERFORMANCE]

Stink-

You can count on me as "in" for whatever you come up with in this department.

PM me when things are all figured out.

will do bubba:rock:

thinking of running a braid line from the abs down, and then also maybe doin all the lines from the abs

 

[Kevan]

cool dude, Dodge is trying to piss me off the rear went great, the passenger side went great, only had to make one small bracket.

went to the drivers side and BAMMM!

but may have it figured out, may hav to run a braided line from the ABS to the connector to the caliper on the drivers side.
May even get the other two in braid that way the entire under the hood shall look a tad trick.
its just been an ordeal with this one connector:dontknow:

Tony- I figured out how to do it with NO drilling or new screw holes.
You can even leave the hard lines from the ABS box.

I also figured out how to do it for the rest of the Ram trucks too.

 

[JTS VENOM PERFORMANCE]

Tony- I figured out how to do it with NO drilling or new screw holes.
You can even leave the hard lines from the ABS box.

I also figured out how to do it for the rest of the Ram trucks too.

If ya talking bout cutting and flaring the lines, I have tried to stay away from that, but will call ya later, been a heck of a two weeks for me

 

[eddie102870]

If ya talking bout cutting and flaring the lines, I have tried to stay away from that, but will call ya later, been a heck of a two weeks for me

have you learned you to use the toilet again? joanne said she was tired of cleaning up your spills

 

[Kevan]

If ya talking bout cutting and flaring the lines, I have tried to stay away from that, but will call ya later, been a heck of a two weeks for me

No. No cutting or flaring of existing lines.
I found some great parts, and am still looking for even better ones.

The phone's always on, Tony.
Whenever you're not fighting off ATL traffic.

 

[JTS VENOM PERFORMANCE]

Ok fellas found the perfect fix to the problem

jsut to explain dodge decided to change on fitting only on the fdrivers side hard line to a 12mm with a 1.0 thread , and no one has anything to workd with it, welp found it:rock: will call tommorrow.

Kit should stay under 2 bills if thats ok with everyone:dontknow: