scoobert
Has Left the Room - Banned from VTCOA!
saw the crank shaft pully wobbling today is that normal? think it might be 1/8 inch wobble.
crank shaft pully wobble?
- Thread starter scoobert
- Start date
NO! TIGHTEN IMMEDIATELY!there have been some folks who have had the pulley score the crank! this is problematic with 04s' it seems. re-torque with blu-loctite. (mine was finger tight!)
SlvrSnake
Full Access Member
It's not just the 04's. I had mine checked and it was loose, tech replaced it.
GADodgetech
Full Access Member
Theres a TSB on it, make sure it did not damage the crank or pulley itself. DO NOT DRIVE IT UNTIL IT IS FIXED!!!!!!!
Major issue...please follow the advice above...do not even start it...until you crawl under it and tighten...
perk_1405
Full Access Member
i had to replace my crank b/c of the scarring from the pulley comming loose.
faslane505
Full Access Member
ive actually had to replace mine on both of the viper truck...(my current 05' and tims old one i bought...now owned by tsmith) very problematic with these trucks...they just fell off!
There is a solution...supercharge it...and you will have to pin the crank in the process! :rock: :rock: :rock: :burnout:
scoobert
Has Left the Room - Banned from VTCOA!
what would dodge charge to do it?
i really dont see myself coming out of a job like that good.
frustration = damage for me. i have been known to saw holes in things, important things, to finish jobs. (ask my old newyorker with a hole above the fuel pump)
i really dont see myself coming out of a job like that good.
frustration = damage for me. i have been known to saw holes in things, important things, to finish jobs. (ask my old newyorker with a hole above the fuel pump)
GADodgetech
Full Access Member
they would probaly charge 1 to 2 hours, depending on the shop.scoobert said:
andrew heywood
Full Access Member
Take it easy, do not operate the truck. assertain torque specs and add the locktite..............THESE GUYS WILL WALK YOU THROUGH IT...:congrats:
just checked mine and of coarse it was finger tight.Time for blue loc tite and torque.looks like my oil lines are seeping a little after a closer look. For a race motor and an expensive truck it sure does seem like some pretty significant problems and that dodge should have been a little more particular in production of these few trucks.I guess im just a little mad because my 02 20,000 dollar hundai has had no issues with 80,000 miles and was MASS produced
I'll do it for about $`12,000.00 but it would include a supercharger installscoobert said:
scoobert
Has Left the Room - Banned from VTCOA!
ryan said:
i have bad news, your hundai that you paid 20k for is worth less then $1000 now.
and if your motor blows tomorrow you can part out the truck for more the you can sell it for i bet.
scoobert
Has Left the Room - Banned from VTCOA!
oh? and what hp out the door?Stinker said:I'll do it for about $`12,000.00 but it would include a supercharger install
1/4?
0-60?
0-100?
top speed?
we might talk this fall.
scoobert said:
Just saying lots of problems leaks,blown motors,oil lines,clutches,and from what i have seen its not a sellers market for these either.Dont get me wrong i love the truck im just a little nervous every time i drive it..and i can still get 9200 out of the hundai
GADodgetech
Full Access Member
It vibrates like hell, makes a buncha power, eats tires, Inhales gasoline, and is extremly obnoxious. thats why shit comes loose and breaks. :rock: :rock: :rock: :rock: :rock: :rock: :rock: :rock: :rock:ryan said:Just saying lots of problems leaks,blown motors,oil lines,clutches,and from what i have seen its not a sellers market for these either.Dont get me wrong i love the truck im just a little nervous every time i drive it..and i can still get 9200 out of the hundai
GADodgetech
Full Access Member
Gotta take the good with the badryan said:
Support Us
Become A Supporting Member Today!
