Doms Turbo Truck Build V.87.2

JMB Justin

Active Member
Preferred Vendor
Joined
Sep 19, 2006
Messages
2,649
Reaction score
1
Location
Hillsboro MO
Well its back again for massive weight savings and a new EFI system. Hard to believe it never was intended to be more than a 1000whp street only build almost 5 years ago. Ill post pics of the progress as we go. Goal is street legal, sub 4000 # with driver, same or slightly more power with new EFI system/tune, 8.XX@160+ ET. Judging by my calculations/progress/scaled weights, we will have taken off 600#'s by the time it leaves

Before:

DSC_0696.JPG

DSC_0697.JPG

DSC_0698.JPG

DSC_1080.JPG

100_3797.jpg

100_3667.jpg


After a few weeks:

6695360311_b63e962fd4_z.jpg

6695368997_4c2282a0c8_z.jpg

6695378181_617719a31e_z.jpg

6695385095_23192b33a5_z.jpg

6695389811_0923c9b313_z.jpg

6695408467_2e4a876f1c_z.jpg

6695442057_6f1701257c_z.jpg

6695445715_464f74ae06_z.jpg

6695448989_9918e9cc70_z.jpg

6695452345_2b9f9f0ac1_z.jpg

6695455743_196cc893a3_z.jpg

6695461489_07c4a4b1d1_z.jpg

6695488831_aed5cb6416_z.jpg

6695491701_379eeef7ea_z.jpg

6695494841_4ef9909a9e_z.jpg

6695498005_9a7fb89f9a_z.jpg

6695500835_58e2ef756d_z.jpg
 
imagine that, coils where you don't have to take the intake off. :D

Looking forward to seeing the final product. :rock:
 
Kick ass Guys , 8.xx would be awesome ! :rock::rock:
 
Thanks Guys, heres the weight list so far, I did not scale it before it arrived and its kind of up in the air what the base weight was (supposedly 4200-4400#), but all of these weights are directly from my shipping scale (except the estimated weights at bottom):

Brake booster/master cylinder/abs module 21#
PCM, coils, injectors, wires, vec 16#
All Stereo except wiring 20#
All wiring, aftermarket guages, IC sprayer, meth pump, boost controller etc. 79#
Steering column and wheel 21#
Dash metal structure 24#
Carpet and interior insulation 36#
Heat shields and exterior insulation 8#
All interior plastic and oem guages 70#
Door metal structure 20#
Rest of insulation/dynamat/interior brackets 6#
Oil cooler 7#
headliner/misc interior trim and wiring 22#
Power steering setup 35#
N20 bottles mostly full with bracket 50#
Water injection jug when full 15#
Brakes (rotors/calipers/hubs) 151#
Bogart/Kumho Wheels/tires 113#
5" Exhaust exiting before rear tire 43#
Lower control arms 66#
Xmetal springs 38#
Steering column/pedal mount modifications 2#
Stock pedals 10#

Still possible weight removal:
Rear crash tube/bumper area

Added:
New front springs 25#
New column and new wheel 8.5#
New steering setup 14#
New master cylinder with mount 1.5#
New pedals 5.5#
New lower control arms 55#
New Body wiring harness/relay and fuse panels/switch panel 7#
New exhaust 8#

Adding Estimate:
EFI boxes and engine wiring, injectors, coils, dash display 20#
Interior carpet, door panels, aluminum dash 22#
New wheels/tires 45# (according to manufacturers)
New Brake setup 50# (rotors/calipers 36#)
 
Last edited:
damn, should be sweet.....now just get Dom's fatass to shed some lard or all that will be a waste.:D
 
Looks good as always Justin!

Do you plan on offering any of this stuff for sale? Control arms, brake system, engine management including coils, harnesses, dash, etc?
 
Back
Top