Electric cutouts..

I'm not sure if my cut outs were the same manufacturer or not however they are the exact same style and design. I had ordered them with my JMB mids. All I can say is they lasted less than 8 hours of driving time before the rubber melted and the electric motor fell off. I was not happy with them at all. I would not suggest getting any that have any rubber on them at all for obvious reasons. Also look at how the motor is attached to the plate assembly and make sure its not held in with 2 small bolts that easily break and rattle off due to heat and or vibration.
 
SrtBrad said:
I'm not sure if my cut outs were the same manufacturer or not however they are the exact same style and design. I had ordered them with my JMB mids. All I can say is they lasted less than 8 hours of driving time before the rubber melted and the electric motor fell off. I was not happy with them at all. I would not suggest getting any that have any rubber on them at all for obvious reasons. Also look at how the motor is attached to the plate assembly and make sure its not held in with 2 small bolts that easily break and rattle off due to heat and or vibration.
Click to expand...

No warranty? There is another brand that come with a 1 year warranty. I'll try and come up with the info for you. We have a guy on the HD forum that runs them and has had them on for a year or so and uses them almost every day. I'll try and get more for you.
 
We got them warrantied (they were QTP cutouts), there is an all metal version, I cant think of the company name, but thats definitely who I will be using from now on. Its sad that Brad and I had to deal with the hassle from the poor quality.
Justin
 
Fepony said:
No warranty? There is another brand that come with a 1 year warranty. I'll try and come up with the info for you. We have a guy on the HD forum that runs them and has had them on for a year or so and uses them almost every day. I'll try and get more for you.
Click to expand...

JMB Justin has been a stand up guy and returned the cutouts to the manufacturer and has issued me a full refund.:rock: :rock: They were willing to replace them with the exact same model but I said no because it was just a bad design to start with. I believe there are better ones that are two times more expensive with no rubber and a better design. I might get those later.
 
I was thinking, if you had enough heat to damage those cutouts, you were possibly running way too lean. That looks exactly like the electric cutout I use on my race car and even under full boost and with my turbo glowing red hot, the cutout is not damaged at all.

maybe you got a dud??

~mike~
 
AWDisuzu said:
I was thinking, if you had enough heat to damage those cutouts, you were possibly running way too lean. That looks exactly like the electric cutout I use on my race car and even under full boost and with my turbo glowing red hot, the cutout is not damaged at all.

maybe you got a dud??

~mike~
Click to expand...

Must have been a dud as I was running 12 to 1 AF mixture under WOT. Still how come the motor to the electric motor vibrated loose and fell off.
 
they gave you the mustang version hahaha




SrtBrad said:
Must have been a dud as I was running 12 to 1 AF mixture under WOT. Still how come the motor to the electric motor vibrated loose and fell off.
Click to expand...
 
will these give u any hp gain or just make the engine lose to much back pressure and then suck the power out of it??? i heard these v10s need a bit of backpressure
 
SRT10VENOMOUS said:
will these give u any hp gain or just make the engine lose to much back pressure and then suck the power out of it??? i heard these v10s need a bit of backpressure
Click to expand...

From what I understand you will loose a little torque but gain HP. For the 1/4 you will loose a little on your 60 and gain MPH on your trap speed.
 
SrtBrad said:
From what I understand you will loose a little torque but gain HP. For the 1/4 you will loose a little on your 60 and gain MPH on your trap speed.
Click to expand...


i ran with the cutouts open and closed....did not get a tenth of difference in time or mph...13.3 @106 with 1.95 60fts both runs:dontknow: they sre sound cool though:D
 
I have been looking at the McCord power plate cutouts,When i put my headers on and jmb catless mids my borla catback came in a few days later it sounded awsome without a muffler i would love to have a push button to open her up.
 
You must log in or register to reply here.

Latest posts

Support Us

Become A Supporting Member Today!

Click Here For Details

Random Media

2015 01 02 11.39.30
IMG 0892
IMG 1415
2012 07 19 12.58.57
Back
Top