First Blood

[rottenronnie]

mmm who is striker??

Striker is the name of the head designed by head guru, Mr. Jeff Morys.
His company is JM Cylinder Heads. Strikers are a complete redesign and not a ported o.e.m. head.
Jeff also did R&D on the 2008 Viper heads. The heads being the biggest single reason for the '08s increase in power.

A Striker group buy was setup a while back through Nathan and I jumped on it.

 

[rottenronnie]

We have a few members with heads/cam packages. To get another 100-150 rwhp nitrous is the cheapest. If you search the archives you'll find out that the pistons are likely not gonna like that much more power and #3 piston will fail first.

Who will be tuning your truck with the mods installed? BE SURE AND HAVE SOMEONE FAMILIAR WITH THE VIPER V10 MOTOR DO YOUR TUNING or bad bad things will happen!

Viper mods and parts as well as labor are very expensive!

Good advice.
If you get a chance to have your injectors flowed, you can stick the richest one in the #3 hole for a bit of added insurance; if you are concerned about it.

Ron

 

[Ironhead]

i want the heads and cam ,,,,give me ,,,lol ,,,is there package deal on them any were i cant even find a web site ,,,if you got one please post it

 

[ARRESTmeRed04]

thats great advice about the injectors, i'd of never thought of that but will look into it when i get my N20.:rock:

 

[wyoramsrt-10]

i want the heads and cam ,,,,give me ,,,lol ,,,is there package deal on them any were i cant even find a web site ,,,if you got one please post it

Don't know of the website, but I do know they were around $6k on the group buy.

 

[rottenronnie]

i want the heads and cam ,,,,give me ,,,lol ,,,is there package deal on them any were i cant even find a web site ,,,if you got one please post it

http://www.jmcylinderheads.com/default.htm

You will need heads, valve cover spacers (because the Jesel roller rockers won't fit under the low stockers), cam to take advantage of the heads, hardened push rods, spark plugs, a new tune, gaskets, fluids, plug wires, etc. The chainset through Dodge is $550.00 but there are adjustable sets out now that make it easier to dial in the cam to your liking.
$9.5K+ if you do the work yourself.

 

[riley6]

On another topic, has anyone seen or done a low rider suspension setup on an srt 10 (no wheelwell gap)?

 

[LoveThisTruck]

Welcome:rock: Check out the timeslip section. That'll give you a good idea of what it'll take to get where you want to be. Enjoy

 

[Yellow venom]

RON,W O W !!! your truck sounds very sweet!! It sounds like it just wants to be unleashed!! Let me know when you can make it up here.!