robwclark
Full Access Member
Hey guys. I have sold my turbo truck due to money problems a few months ago. Originally I had pulled this engine out of my 2006 RC for a rebuild due to low compression on one cylinder. Well, I put a bone stock engine in it, and returned it to 100% stock, and sold it at the Dallas Auto Auction to a dealer. Now after like 2 years the motor for that truck is finally ready. Only problem is, I dont have a Viper car or Truck to put it in. It is a complete longblock, but I purposely have not installed the heads or intake manifold simply because I was the person who buys this engine to see the work first hand. The engine was completely torn down and bored .10 or .20 over(I cant remember the exact #'s off the top of my head, but it didnt need much, basically a measured/machined hone), and rebuilt with Diamond Racing Forged pistons and rings, clevite bearings, factory camshaft, factory rods, and the original factory crank was turned .10. It was cleaned and baked and looks like a freaking crate motor. The engine was assembled by myself and my builder/machinist. I dont have any big names to throw out there, but I'll tell you this: All the work was done with an incredible amount of pride. This was supposed to by MY engine going into MY truck, so every clearance, spec, and torque were PERFECTLY executed. This will serve someone an excellent engine for miles and years to come if it is maintained properly. This engine will handle 12 or 15 lbs of boost no problem, probably more. I can provide the VIN# from the original truck this engine was removed from. This engine will work in all 2004-2006 SRT-10 reg cab 6 speeds. I do not think it will fit an automatic transmission with out modification. The heads are stock. The intake manifold is stock except it has been powder coated black to match my old truck. The factory push rods and rockers are included along with all the oem bolts for assembly. The valve covers are included. The coil packs are stock, but are included. No throttle body, PCM, wire harness, or oil pan as all this stuff was used on the truck the engine came from. The 2006 knock sensors are included. Factory manifolds are included. Its ready for your choice of Cam, exhaust, Throttle body, rockers etc. Compression is slightly increased to about 9.5, maybe 10:1. It will make a wonderful NOS engine or Paxton/turbo engine. I built it to use a Paxton on it. Anyway, I need it to go away. I will take $5000 firm for this complete long block engine. This engine is worth SO MUCH MORE, so please no offers. I want $5000. Only God knows how much money I spent on this build. This is a huge savings for whoever buys it. This engine is new and never been run. I will consider trades of any kind of value, but keep in mind, I'm selling so cheap, I would expect the buyer to be fair. I'll post some pics later today if I get time. I dont check my PM box very often so its best to call me at (817)556-1133. I am close to Fort Worth, Texas. I will be happy to help arrange shipping, if needed. Thanks for reading guys and sorry I had to jump ship. Financial obligations forced it. Call me anytime. Robert