FRONT ROTORS

[01VIPERGTS/ACR]

has ANYONE replaced there front rotors?if so,where did you get them?the only place so far i have found is the stealership and those crooks want 290.00 ea.i have searched far and wide and come up with noda.all the aftermarket places claim they got (or can get) drilled and slotted but when i go to buy them it`s a different story blablabla.i even ordered a set from summit racing equipment,(PWR-8750XPR Cragar Cryogenic, Cross-Drilled/Slotted)the first ship date was 3/14/07,now its 4/13/07.god forbid if any of us actually needs a set....THEY DONT EXIST.:dontknow:

 

[BigRed460]

I can get them from my dealer for way cheaper if you go that route...

 

[GILMO'S10]

HOW MANY MILES YOU GOT ON THAT BAD BOY.
NEW ROTORS ALREADY:dontknow:

 

[BlackKnight]

EBC makes aftermarket rotors. PerfectBrakes.Com shows a slotted/dimpled EBC set for $198.
They have an OEM set which assumably sells for less but you have to email for the price.
http://www.perfectbrakes.com/products.asp?cat=1252
Found this in a past thread. Might help

Also AutoPartsWarehouse.Com has the same EBC slotted/dimpled rotors for about $20 less (and also a PowerStop Cross-drilled brand - same price per pair):
EBC: http://www.autopartswarehouse.com/pe... &brandid=2162
PowerStop: http://www.autopartswarehouse.com/pe... &brandid=2234

 

[01VIPERGTS/ACR]

HOW MANY MILES YOU GOT ON THAT BAD BOY.
NEW ROTORS ALREADY:dontknow:

i just want a set of drilled and or slotted rotors.mine are fine,but i have a tiny shake when braking.so i figure i`ll get them turned....wrong!no part houses around here anyway turn them.the said rotors are so cheap nowadays it just easier to purchase new ones.oh we are sorry....we cant get yours.

 

[DRamSrt10]

How much each miles should rotor to be change? I think mine need to change soon.

 

[Azmotorhead]

Get ahold of Patrick at Avodale Dodge,He's a vendor here.
Should be able to get a better price on rotors.
OR Take em to a good shop and get them turned I turned my 1st set with no trouble.
When I got new rotors I got them from Henson Motors in Tx for about 175 a piece

 

[01VIPERGTS/ACR]

just got off the phone with summit racing.finally got a guy that did some research for me.he called on the set i have on order.....those dont fit the srt!!!ha,go figure.they did however come out with a set that does and they have a few sets on the shelf(at powerstop)and they are only slotted,i really would rather have drilled.ok everybody are you sitting?$$$$$$$900.00$$$$$$ plus shipping.:2in1: needless to say...AINT HAPPENING.he also called ebc direct....they have back orders a mile long and no blanks to make them with.so thats a big NOT!!!! well anyways,i guess if your not rich you will be dealing with the factory rotors for awhile. SHIT SHIT SHIT

 

[mooni]

i just want a set of drilled and or slotted rotors.mine are fine,but i have a tiny shake when braking.so i figure i`ll get them turned....wrong!no part houses around here anyway turn them.the said rotors are so cheap nowadays it just easier to purchase new ones.oh we are sorry....we cant get yours.[/QUOTE

go to big ten tires. the rotors are 10 to 15 bucks a piece to turn. everytime i do my brakes on my other cars i just go to them.

 

[01VIPERGTS/ACR]

i just want a set of drilled and or slotted rotors.mine are fine,but i have a tiny shake when braking.so i figure i`ll get them turned....wrong!no part houses around here anyway turn them.the said rotors are so cheap nowadays it just easier to purchase new ones.oh we are sorry....we cant get yours.[/QUOTE

go to big ten tires. the rotors are 10 to 15 bucks a piece to turn. everytime i do my brakes on my other cars i just go to them.

if only there were a big 10 near me.

 

[Muzzy]

Try a local muffler and brake shop. They will most definitely have a brake rotor turning machine. Also, if you are putting new pads on, the rotors need to be surfaced.

-Muzzy

 

[Kevan]

just got off the phone with summit racing.finally got a guy that did some research for me.he called on the set i have on order.....those dont fit the srt!!!ha,go figure.they did however come out with a set that does and they have a few sets on the shelf(at powerstop)and they are only slotted,i really would rather have drilled.ok everybody are you sitting?$$$$$$$900.00$$$$$$ plus shipping.:2in1: needless to say...AINT HAPPENING.he also called ebc direct....they have back orders a mile long and no blanks to make them with.so thats a big NOT!!!! well anyways,i guess if your not rich you will be dealing with the factory rotors for awhile. SHIT SHIT SHIT

EBC makes aftermarket rotors. PerfectBrakes.Com shows a slotted/dimpled EBC set for $198.
They have an OEM set which assumably sells for less but you have to email for the price.
http://www.perfectbrakes.com/products.asp?cat=1252
Found this in a past thread. Might help

Also AutoPartsWarehouse.Com has the same EBC slotted/dimpled rotors for about $20 less (and also a PowerStop Cross-drilled brand - same price per pair):
EBC: http://www.autopartswarehouse.com/pe... &brandid=2162
PowerStop: http://www.autopartswarehouse.com/pe... &brandid=2234

(Thanks BlackKnight!)

 

[BlackKnight]

No problem bro

 

[rottenronnie]

has ANYONE replaced there front rotors?if so,where did you get them?the only place so far i have found is the stealership and those crooks want 290.00 ea.i have searched far and wide and come up with noda.all the aftermarket places claim they got (or can get) drilled and slotted but when i go to buy them it`s a different story blablabla.i even ordered a set from summit racing equipment,(PWR-8750XPR Cragar Cryogenic, Cross-Drilled/Slotted)the first ship date was 3/14/07,now its 4/13/07.god forbid if any of us actually needs a set....THEY DONT EXIST.:dontknow:

The rotors are throw away items. I replaced mine at 25,000 miles. Bought them from a dealer at trade price.

Ron

 

[SilvrSRT10]

There are some places that can't handle rotors our size. I pulled my rotors myself and carried them down to my local dealership. $30 later, Nice smooth stops. If you take your truck too them to have it done your looking at approx. $100.

 

[Rice Eater]

Dennis I haven't done the fronts but i did replace my back ones since one of them was cracked real bad. I got the EBC rotors that are slotted and dimpled. They work good, look good and I got them for a steal.....140 for both rears! After I installed them I wanted some for the fronts but they had gone up to like 220 for both on the same site which I forget which one it was. Here are pics:http://s6.photobucket.com/albums/y226/Surfer27/New Mods/

 

[6pakattack]

Hey Dennis,here's a link to the co I got my Brake Pads from,give them a call and see what they can do for you !!!

http://www.porterfield-brakes.com/rotors.html