G-Tech Pro Performance meter

[amtrucker22]

I found one of these meters on Craigslist and thought it was interesting. Here is a write up and review on it:

http://mustangworld.com/ourpics/hitech/gtech1.htm

Floor mentioned a dpic on another thread but was actually a gauge that would need to be mounted.

I figure for $40 it was worth it and bought it. This thing is pretty cool. I have only ran my HP once and it came up to 408 (which is close considering the last dyno I got was 417) and it was a on a slightly curved road.

My 0-60 was 5.4 but my tires are pretty full of air trying to get all my MPG out of them.

Overall a fun meter for a real cheap price. At least maybe a step above SOTP dyno. :dontknow:

Accuracy reading are as follows:

0-60mph +/- 1/10 sec.

60-0 braking distance +/- 2 feet

1/4 mile E.T. +/- 1/10 sec.

1/4 mile speed +/- 1mph

Horsepower +/- 3 hp

Instantaneous G forces +/- 2/100 G

Continuous G forces +/- 2/100 G


There are some for sale on ebay (even the newer model) pretty cheap!

Just thought I would share...

 

[SrtBrad]

An excellent price for a meter that does reasonably well in performance tests.

 

[perk_1405]

i watched an episode on trucks when they tested one on a truck then put the same truck on their dyno and the hp numbers were only 5 or 10 hp off.. thats a pretty cool device..

 

[GILMO'S10]

that looks like a cool toy.May have to look into getting one for chits and giggles! Thanks for posting

 

[amtrucker22]

I figured if I get consistent numbers out of it and then I ad a small mod, it should give me a rough guesstimate of gains, without having to go to the dyno. :dontknow:

 

[Carlwalski]

I have one, not installed yet. As mentioned, great for a cheap "whaddya gain" hp/T device. :rock: