Justins line lock kits jsut plain work!:rock: :rock: :rock:
I want the COMPLETE Line Lock Bolt On Kit
- Thread starter HaulinAsp
- Start date
moparracing
Full Access Member
good kit, but the switch & inline fuse leave alot to be desired........
http://www.vtcoa.com/forums/showthread.php?t=22786&highlight=line+lock
http://www.vtcoa.com/forums/showthread.php?t=22786&highlight=line+lock
I have never had a line lock car. Can someone please explain in layman's terms from 1 to # of how you use it? From what I know you pump the brake, clutch in push the line lock button rev, dump clutch, truck stays completely still? No?
moparracing
Full Access Member
basically the line lock locks your front brakes so you can release the brake pedal to work the gas & clutch....... when you press on the brakes, switch on your line lock, your brakes stay applied on the front's until you turn your linelock back off....... lets ya heat up your tires in a smokey burnout without touching the brake... once you release your line lock, forward you'll go.....Carlwalski said:
it's alot easily on the rearend & the rear brakes rather than power braking like others do without line lock....... i'd say it's a must for the track.
Thanks mate, makes sense.
The Itch
Full Access Member
moparracing said:basically the line lock locks your front brakes so you can release the brake pedal to work the gas & clutch....... when you press on the brakes, switch on your line lock, your brakes stay applied on the front's until you turn your linelock back off....... lets ya heat up your tires in a smokey burnout without touching the brake... once you release your line lock, forward you'll go.....
it's alot easily on the rearend & the rear brakes rather than power braking like others do without line lock....... i'd say it's a must for the track.
I went to have mine installed today. The brake guy said there wasn't a diagram for an install for the 05 ABS system and he didn't want to mess it up. Has anyone blown a line using this setup?
Kevan
Full Access Member
Print out my DIY article and hand it to him.The Itch said:
Oh, and ask for a discount for doing 3/4 of the work.
There are dozens of line locks installed on SRT-10's and to my knowledge, none have had any issues with the brakes or blown lines.
FATJACK
Full Access Member
No sweat, bolted right up. It could use some brief instructions though.
moparracing
Full Access Member
sent you a pm with links to kevan's instructions.....The Itch said:
The Itch
Full Access Member
moparracing said:sent you a pm with links to kevan's instructions.....
Thanks bro...:rock:
Support Us
Become A Supporting Member Today!
