mopar performance headers w/catless mids

[dragon]

this is a set of mopar performance headers with the catless mid pipes. made of stainless steel and mandrel bent tubs, these things look sweet. comes with all the mounting hardware you will need. mopar has not posted any performance gains so i will need to turn to the VTCOA members to help there. in most other header applications the HP and TQ gain has been 10% so if true this will be a 50HP and 50TQ gain.
this set is for a RC there is a diffrent number for the QC and it is a bit more in price. this set will sell for $1675.00 and we will cover the shipping and insurance. part number is p4510844.

:rock: :burnout:

 

[RedRamRules]

A common question I think would be between these and the Belanger headers, which would be the best. I have read that the performance numbers are almost the same. Perhaps the ceramic coating on the Belangers is the only difference. I would definately consider these headers. Thanks for the heads-up!

 

[JTS VENOM PERFORMANCE]

Awesome deal Dragon! Someone needs to jump on these!

I would get em , just dont think I could mount my turbos on them!LOLO

 

[dragon]

thanks someone will be happy with these.

let me know what you guys think of the mopar performance headers if you have installed them on your truck? how it performs? install? and so in let me know your input.

thank you

 

[lightningKILLER]

dragon...me, u and and IOU??

thanks bro!!
hahaha...those are sweeeeeeT!

 

[mopower1958]

What is the inside diameter of the collector and midpipes?

 

[vpr hler]

I believe that Rice Eater has this set-up ( mopar headers and mids ). he would be able to inform you on any performance gains.

 

[TheMoparConnection]

mopar has posted performance gains...at least 35hp and 35lb ft tq...I have that set up and dyno shows more than that...these are the best looking headers I HAVE EVER SEEN!!!

 

[dragon]

the inside diameter on the collector is just over 2 7/16 almost 2 1/2.

thank you

 

[Sharpimage]

Hey Dragon, sent you a PM bro :rock:

Sharpi

 

[newmexicoviper]

Those do look good how much for a QC set up.

 

[KRAZYSRT10]

Do you guys carry the High Flow cats as well???

 

[newmexicoviper]

Do you guys carry the High Flow cats as well???

Those mid pipes do away with the cats.

 

[dragon]

i can get high flow cats. i will have to check around but i can get them. and these pipes do away with the cats. you will need O2 sims for the rear O2 sensors.

 

[Prof]

I had 38 hp gain with the MOPAR headers...

Get them coated before install. I didn't, have them wrapped, and will uninstall this next winter to have them coated.

Strapped my rear sensors to the frame.

 

[dragon]

yes get them coated looks much better then the the heat wrap. much cleaner look.

 

[FL06SRT10]

Question what is the difference between these two part numbers? part number is p4510844 and P5153168? Will P5153168 fit on a regular cab 2006? Thanks!

 

[68charger]

Question what is the difference between these two part numbers? part number is p4510844 and P5153168? Will P5153168 fit on a regular cab 2006? Thanks!

Thats the part #5153168 that was on mine and they fit fine just the o2 extentions had different plugs had to extend the oem plugs

 

[BLWNSRT]

Thats the part #5153168 that was on mine and they fit fine just the o2 extentions had different plugs had to extend the oem plugs

:dito: but I swapped ends on the O2s.

 

[oldcolt]

Thats the part #5153168 that was on mine and they fit fine just the o2 extentions had different plugs had to extend the oem plugs

I trimmed the plugs to make them work on mine.