N.A. trap speeds

[Begood]

I am just wondering what any of our N.A. guys (means no turbo, no SC, and no NOS) traps speeds are?

I went with Nathan (Notahemi) last november to a old bumpy drag strip in our area, but because of my own mistakes (air pressure mostly) i could not get my 60' under 2.22.

I was able to run a trap speed of 109.97 MPH, I was wondering what everyone else is running.

My truck has a B & G computer upgrade, MSD plug wires, K & N CAI, Boomer 3" mid pipes (no cats), Magnaflow cat-back, and 4:56 gears.


Bill.

 

[eddie102870]

you get your headers installled yet?

 

[mmmmtorque]

Thats pretty good for N/A....

I usually trap between 109 and 112 N/A myself.

 

[Begood]

They are installed, I just have to re-route my plug wires now to keep them away from the headers. I am also finally installing Boomer's lowering kit, and changing the trans fluid, plus installing the JMB traction kit.

I'm hopeing these things will help my 60'.


Bill.

 

[TheMoparConnection]

I HAVE HAD A 110 TRAP SPEED USUALLY AROUND 109

 

[Annu Kumar]

Hey Begood You Can Call Dc Perf. and order some thermal products to Protect your ignition wires from The headers.

 

[ViperTruck2933]

109 mph should be good for a high 12 sec run if you have a decent 60.

 

[Blaine@PSI]

All stock and I trap around 108-111mph and usually runs 12.6-12.8 most of the time.

 

[Begood]

Hey Begood You Can Call Dc Perf. and order some thermal products to Protect your ignition wires from The headers.

Thank you for the info sir.

Bill.

 

[eddie102870]

go to auto zone and get the fiberglass insulators will help, ive had no problem with mine, theyve been on for a couple of months now. you better get off your ass and get it all done before next weekend.

 

[BigRed460]

106-108 Bone stock

 

[DRamSrt10]

I know what N.A. is but what is trap speed? :dontknow:

 

[rottenronnie]

I know what N.A. is but what is trap speed? :dontknow:

Vehicle's M.P.H. at the end of the 1/4 mile.

 

[FlyingLow]

Stage 2- 12.7@108

 

[BigRed460]

I thought it was measured over the last 60' of the run or something.

 

[DRamSrt10]

Vehicle's M.P.H. at the end of the 1/4 mile.

Ah I see. Thanks.

 

[OsirruZ]

All stock and I trap around 108-111mph and usually runs 12.6-12.8 most of the time.

Stock? Holy hell! What am I doing wrong? Best I have been able to do so far is 13.6 @ 104 completely stock. I know I am having trouble getting it off the line but shifting down the track is in the bag. Best 60's I have been able to pull is 2.2's. Need to practice my launching technique I suppose.

 

[JMB Justin]

Ive only made two passes with mine, but they were both 110MPH, the best pass was 1.9 60' [email protected].
Justin

 

[Blaine@PSI]

Stock? Holy hell! What am I doing wrong? Best I have been able to do so far is 13.6 @ 104 completely stock. I know I am having trouble getting it off the line but shifting down the track is in the bag. Best 60's I have been able to pull is 2.2's. Need to practice my launching technique I suppose.

believe me it is a fine art. People have said my truck sounds like an auto. But yes BONE STOCK some will say that i have a flash but that is not the case i checked the pcm and dodge reflash it just to make sure. I just recetly put a K&N in the stock box and cut a hole in the front of it. need to take it down the track again to see if it made a difference. oh yea 60 are in the 1.9-2.0 range on stock wheels and tires. i put the PSI down to 16lbs and get them pretty hot, and launch around 4000 rpm easing out on the clutch very quickly.

 

[FlyingLow]

16psi!!!!!! Why not just run on the rim? That is the lowest I have heard anyone dropping the rear tires.