Once more unto the breach go I

[LoveThisTruck]

im going to break it in easy first then ill plan on whatever ,,,i do have fatjacks and nana,s ol system ,,,he got 90 + out of it but i may drop it to like 75 or so ,,,,BUT im not thinking spraying till i run it a bit...i need some miles for my dollars right now

Sounds like a plan. Congrats on the build:marchmellow:

 

[OSO]

How long before we make it to the track
Damn good numbers that's what a hundred over from the last dyno?
I thought Roberts was only supposed to be down three weeks, what your saying really doesn't sound good. I know he said he wanted a real choppy cam.

 

[Venom Power]

I can't see a damn thing from here. So, I want to say ARD is a great place to use, but with Robert's truck down so long there.... I dunno.

 

[Prof]

im going to break it in easy first then ill plan on whatever ,,,i do have fatjacks and nana,s ol system ,,,he got 90 + out of it but i may drop it to like 75 or so ,,,,BUT im not thinking spraying till i run it a bit...i need some miles for my dollars right now

Very nice numbers on motor only.

Sean's tunes are very safe. Your tuner can probably pull more, but think very carefully about it. There are always machines out there that can pull us. But with a safe tune ours will be pulling for years to come...send your dyno print outs to Sean he may tweek your tune a little but the numbers look pretty good right now.

 

[Venom Power]

That's certainly what I would do.:dontknow:

 

[Ironhead]

How long before we make it to the track
Damn good numbers that's what a hundred over from the last dyno?
I thought Roberts was only supposed to be down three weeks, what your saying really doesn't sound good. I know he said he wanted a real choppy cam.

well that guy that did our tunes said he wants the heads done too so the head work alone will take the most time ,,,,i really dont understand roberts need to have just a choopy idle ,,now if they told me a gain of whooping HP but you will have a heavy choopy idle ,,,,but them guys are damn good motor builders ,,,when i was waiting they were disassembling a new corvette motor ,,,they had that engine out of that car in less than and hour ,,,,had it on a stand and tore apart another hour later ,said the motor was fine the guy wanted it bored and stroked and stuck back in :dontknow:

but i must admit i like my lope at idle too now,,i want to hammer it so bad im about to bust ,but im holding back ,,,


O and for antny__501hp/544.27TQ ,,TQ curve is sweet ,,a/f right at 13

now i guess i should change my sig to 500RWD:rock:

 

[Venom Power]

well that guy that did our tunes said he wants the heads done too so the head work alone will take the most time ,,,,i really dont understand roberts need to have just a choopy idle ,,now if they told me a gain of whooping HP but you will have a heavy choopy idle ,,,,but them guys are damn good motor builders ,,,when i was waiting they were disassembling a new corvette motor ,,,they had that engine out of that car in less than and hour ,,,,had it on a stand and tore apart another hour later ,said the motor was fine the guy wanted it bored and stroked and stuck back in :dontknow:

but i must admit i like my lope at idle too now,,i want to hammer it so bad im about to bust ,but im holding back ,,,


O and for antny__501hp/544.27TQ ,,TQ curve is sweet ,,a/f right at 13

now i guess i should change my sig to 500RWD:rock:

Did the ARD guys install your stuff? Or did you limp around the garage doing it yourself? I can't wait to hear her rumble.

 

[Tooloe]

great numbers man....so whats the specs on the build? me and you should be pretty close in power number.... the "same" head work just from diffrent a diffrent guy..and my cam is a custom grind off of the 270 and i've got bigger valves and more compression...what does your idle sound like lol i love mine!

 

[Ironhead]

Did the ARD guys install your stuff? Or did you limp around the garage doing it yourself? I can't wait to hear her rumble.

i did it myself limping around and getting yelled at by my wife for doing it(blah blah blah )!

I did have them help me with the spring and pushrod setup after i noticed the clearance issues ,,,going to talk to roe and see if he can improve my tune any from afar ,,then i will have them do a three pull dyno ,,,,

 

[bigike]

James, I go back to work on Tuesday

 

[Ironhead]

James, I go back to work on Tuesday

damn that sucks u in gulf still ,,,besides when you get back next time i should have it either broken or brokin

 

[Ironhead]

:rock:

 

[Tooloe]

hmmmm we are going to have to meet up an run em! hahaha

 

[Ironhead]

hmmmm we are going to have to meet up an run em! hahaha

im uploading a vid of exhuast sound

 

[Ironhead]

ok here ya go sound clip ,,,my camera aint so great for doing vids but its ok i guess

 

[OSO]

ok here ya go sound clip ,,,my camera aint so great for doing vids but its ok i guess

Very nice!!


How long you going to use that i cant run it until its broke in excuse people want to meet you at the track

 

[Tooloe]

sounds great i think mine just hits a hair harder but mine is still untuned.. what RPM dose it idle at mine idles at 400

 

[Ironhead]

sounds great i think mine just hits a hair harder but mine is still untuned.. what RPM dose it idle at mine idles at 400

mines around 700

 

[Prof]

Really has a very nice rumble...sounds just plain mean! Love it!

 

[FATJACK]

sounds great i think mine just hits a hair harder but mine is still untuned.. what RPM dose it idle at mine idles at 400

400 is way to low. I have always heard a very low idle is hard on the cam lobes.