Roe SC Problem!!

[Manic]

You may able to compress the whole program using Winzip.

Deibs, depending on the size of the file, you may be able to increase the size of your mailbox.

Or use a ftp site too upload the file and be able to download it from there. Our website is down otherwise I would offer for you use that. Sorry!

Will

 

[RedSrt007]

Happened to a few people before. Open up the vec via the allen screws, use a blow dryer and let it dry. Try that, if not..then check injector harnesses.. (DO NOT UNPLUG INJECTORS WHILE IDLEING to test them) you will blow up the vec faster then you say "vec"

-Red

 

[rottenronnie]

Shane,

I should have checked the posts before I drove up to 3 Hills; it would have explained why I couldn't find you there.

It was quite a show. A few SRT-10s, Vipers, slammed trucks, rods, vintage. etc. And- Some of the women were barely wearing anything!!

Good luck with the electricals. You will get it sorted out...

Ron

 

[Deibs]

Well...

:dancing: :star: :dancing: :star::dancing: :star::star::dancing:


The damn thing works again!!!! Smokes liked a bastard after starting it up again but she's alive and kicking.

I'm at the shop now, just gonna change my oil and then check out some spark plugs as per NBT's (Ken) suggestions. I'll let you guys know how much is wrong and what the oil looks like.

Thanks everyone for your suggestions and especially Ken for allowing me to call you on your birthday! I owe you at least a beer but it's gonna be a Canadian beer so watch out.

 

[mmmmtorque]

Well...

:dancing: :star: :dancing: :star::dancing: :star::star::dancing:


The damn thing works again!!!! Smokes liked a bastard after starting it up again but she's alive and kicking.

I'm at the shop now, just gonna change my oil and then check out some spark plugs as per NBT's (Ken) suggestions. I'll let you guys know how much is wrong and what the oil looks like.

Thanks everyone for your suggestions and especially Ken for allowing me to call you on your birthday! I owe you at least a beer but it's gonna be a Canadian beer so watch out.

Glad things are working out


If you every have any VEC questions, feel free to give me a call....drop me a pm and I will be more than glad to help out 24x7

 

[Deibs]

Shane,

I should have checked the posts before I drove up to 3 Hills; it would have explained why I couldn't find you there.

It was quite a show. A few SRT-10s, Vipers, slammed trucks, rods, vintage. etc. And- Some of the women were barely wearing anything!!

Good luck with the electricals. You will get it sorted out...

Ron

Didn't even see your post Ron!

Yeah I was almost speechless last night when it happened. I don't think i said a word when my brother picked me up, i just wanted to go home.. i was so pissed, missing one of the best shows in Western Canada........... Getting the truck working again was not worth it, i should have still went on the bike. I had so many buddies and people that i had met before the show that were so pumped that my truck was gonna be there and here i go and let them down because i was an idiot. Next year will be better (as long as i don't do something silly again) i'm hoping to have the motor and tranny built by then. Running 900's to the rears is my goal and dammit i'm gonna get there.

I will be trying to make as many shows this year as i can, if any come up in Calgary shoot me a PM and i'll come down.

Shane

 

[Deibs]

Glad things are working out

If you every have any VEC questions, feel free to give me a call....drop me a pm and I will be more than glad to help out 24x7

I'll for sure take you up on your VEC knowledge. I don't really know any reputable tuners for Vipers around my parts, so it'd be nice to have someone with VEC experience!

Pm Sent.

 

[rottenronnie]

Didn't even see your post Ron!

Yeah I was almost speechless last night when it happened. I don't think i said a word when my brother picked me up, i just wanted to go home.. i was so pissed, missing one of the best shows in Western Canada........... Getting the truck working again was not worth it, i should have still went on the bike. I had so many buddies and people that i had met before the show that were so pumped that my truck was gonna be there and here i go and let them down because i was an idiot. Next year will be better (as long as i don't do something silly again) i'm hoping to have the motor and tranny built by then. Running 900's to the rears is my goal and dammit i'm gonna get there.

I will be trying to make as many shows this year as i can, if any come up in Calgary shoot me a PM and i'll come down.

Shane

Will Do Shane.

I was tormenting some guy in an M5 through the twisties on 21 and that made the trip quite memorable.

Ron

 

[Marc T]

Shane,

Invest in the longer harness and put that thing in the cab!!

Can wash her all you want without worring!!:rock:

 

[NBT]

Well...

:dancing: :star: :dancing: :star::dancing: :star::star::dancing:


The damn thing works again!!!! Smokes liked a bastard after starting it up again but she's alive and kicking.

I'm at the shop now, just gonna change my oil and then check out some spark plugs as per NBT's (Ken) suggestions. I'll let you guys know how much is wrong and what the oil looks like.

Thanks everyone for your suggestions and especially Ken for allowing me to call you on your birthday! I owe you at least a beer but it's gonna be a Canadian beer so watch out.

Your running Bosch super's?
Glad it is working out for you... Canadian beer....XXX:rock: ...hard to believe it was almost 2 years ago we were at the fall's.

 

[Deibs]

Shane,

Invest in the longer harness and put that thing in the cab!!
Can wash her all you want without worring!!:rock:

Yeah but that'd be smart, and that extra $50 to spend well... it's so much! It's gonna get ordered Monday for damn sure.

 

[Deibs]

Your running Bosch super's?
Glad it is working out for you... Canadian beer....XXX:rock: ...hard to believe it was almost 2 years ago we were at the fall's.

I was just looking through my paperwork to see what they sent and they don't have anything listed even on the invoice??? Looks like I got some free spark plugs. I do remember them being NGK Iridiums or something like that. :dontknow:

Sad to say i've never been to the falls, so far away. It'd be like going to Arizona for Florida guys. Hell of a long way to see water falling. Oh and you missed out on some good Canadian beer, and some good time doing burnouts. Yeah yeah i know... no pictures or vids i really need a camera!

 

[tinygiants]

Harness Extension = $ 350.00 (Ouch!)
New Plugs = Pat of the original kit price. They are colder.

 

[NBT]

I was just looking through my paperwork to see what they sent and they don't have anything listed even on the invoice??? Looks like I got some free spark plugs. I do remember them being NGK Iridiums or something like that. :dontknow:

Sad to say i've never been to the falls, so far away. It'd be like going to Arizona for Florida guys. Hell of a long way to see water falling. Oh and you missed out on some good Canadian beer, and some good time doing burnouts. Yeah yeah i know... no pictures or vids i really need a camera!

ROE will tell you to run Bosch Supers...7527's...pn FR8DC+
10 of them are around 12 bucks.:rock: