Sacramento results 2-10-2010 New NA Speed Record

[Tooloe]

bull shit on street tires you sir are full of it

no i am not... with a shit ton of VHT... tire pressure at 22.8lbs i cut a 1.9 60ft..with brand new tires.. i'm still looking for the slip my girlfriend has a habbit of cleaning up stuff she dosn't needto... i could really care less of proving a point... but it was at crandal tx. The track has heated grids underneath the track to keep it a constant temp.... i'm still looking for the slip but i doubt i'll find it.. i will be at the track again when it warms up again an should have no problem doing it again.... the truck is an easy mid to high 11 truck on motor ask Arrestmered.. on the top i pull like a frieght train on him

 

[FATJACK]

no i am not... with a shit ton of VHT... tire pressure at 22.8lbs i cut a 1.9 60ft..with brand new tires.. i'm still looking for the slip my girlfriend has a habbit of cleaning up stuff she dosn't needto... i could really care less of proving a point... but it was at crandal tx. The track has heated grids underneath the track to keep it a constant temp.... i'm still looking for the slip but i doubt i'll find it.. i will be at the track again when it warms up again an should have no problem doing it again.... the truck is an easy mid to high 11 truck on motor ask Arrestmered.. on the top i pull like a frieght train on him

Normally you will get higher mph when you have some wheelspin. Don't know why but it has always been that way.:dontknow:

 

[Dom426]

tooloe you are a built motor though my bad just looke sorry you are brobably making more power trainman is BONE stock besides bolt ons and a diet

 

[TNVIPER]

no i am not... with a shit ton of VHT... tire pressure at 22.8lbs i cut a 1.9 60ft..with brand new tires.. i'm still looking for the slip my girlfriend has a habbit of cleaning up stuff she dosn't needto... i could really care less of proving a point... but it was at crandal tx. The track has heated grids underneath the track to keep it a constant temp.... i'm still looking for the slip but i doubt i'll find it.. i will be at the track again when it warms up again an should have no problem doing it again.... the truck is an easy mid to high 11 truck on motor ask Arrestmered.. on the top i pull like a frieght train on him

I can cut a 1.9 60' with street tires on a half ass prepared track....Your 120 MPH trap speed sounds reasonable with your level of mods....Trainman's truck is not modded much beyond stock so I wouldnt consider a comparison between yours and his apples to apples...

 

[Dom426]

I can cut a 1.9 60' with street tires on a half ass prepared track....Your 120 MPH trap speed sounds reasonable with your level of mods....Trainman's truck is not modded much beyond stock so I wouldnt consider a comparison between yours and his apples to apples...

yeah thats what i was tryin to say thanks larry

 

[Tooloe]

I can cut a 1.9 60' with street tires on a half ass prepared track....Your 120 MPH trap speed sounds reasonable with your level of mods....Trainman's truck is not modded much beyond stock so I wouldnt consider a comparison between yours and his apples to apples...

I completely understand an his numbers are impressive. and until i can find that slip he will hold the highest N/A Record... I'm not knocking him at all.... i've always looked forward to seeing his numbers.. gives me something to shoot for

and it's ok dom i forgive you group hug hahaa:aetsch:

jerry POST VIDEO!! i wanta see!

 

[Trainman]

Jerry nice freakin numbers but i hate to steal your thunder... i've traped 121mph in the 1/4 N/a i'll look for the slip. but i know it was before i took out any weight an was on stock tires...... i'm looking forward to you making me go in debt on buying slicks! lol.. keep up the good work. i'm very very excited to see your numbers.. gives me hope that i might hook up one day

All I am going on are the posted results in the time slip section and it says #33 Tooloe 12.487@ 115.89 with a built motor and 125 hp shot of nitrous.

 

[Dom426]

All I am going on are the posted results in the time slip section and it say #33 Tooloe 12.487@ 115.89 with a built motor and 125 hp shot of nitrous.

hahahahhahaa

 

[JTS VENOM PERFORMANCE]

Nos is not considered naturally aspirated buddy, you may hold it for the highest NOS mph, but not N/A, that means no performance inhanced induction

 

[Tooloe]

Nos is not considered naturally aspirated buddy, you may hold it for the highest NOS mph, but not N/A, that means no performance inhanced induction

thats not the run i'm talking about.... i know nitrous is forced induction....lol

I've trapped 121 with the bottle completely out of the truck... it was before i even bought the new kits after the motor build

an yes kits thats 2 stages lol


i'm looking for low 11's on the bottle:elefant: :elefant:

 

[JTS VENOM PERFORMANCE]

thats not the run i'm talking about.... i know nitrous is forced induction....lol

I've trapped 121 with the bottle completely out of the truck... it was before i even bought the new kits after the motor build

an yes kits thats 2 stages lol


i'm looking for low 11's on the bottle:elefant: :elefant:

if thats the case, and you have timeslip data then yes, you WOULD have the n/a record

Trainman would hold the closest to oem record:burnout:

 

[FATJACK]

If I can get a clutch before Steele Alabama these guys won't have to worry about these records!!!! :aetsch: :aetsch:

 

[Tooloe]

If I can get a clutch before Steele Alabama these guys won't have to worry about these records!!!! :aetsch: :aetsch:

your going down old man.... you can't handle a 225 Shot out of the hole!:aetsch:


o well lets say a 150 out of the hole and a 100 on the big end:rock:

 

[Dom426]

If I can get a clutch before Steele Alabama these guys won't have to worry about these records!!!! :aetsch: :aetsch:

wow what a flippen mess me and my chassis guy are going rounds the clutch was shipped but not the fly wheel until wednesday im gonna shoot myself i am sorry again jack it has beeen a night mare for both of us i apologize bro!!!!!!

 

[FATJACK]

wow what a flippen mess me and my chassis guy are going rounds the clutch was shipped but not the fly wheel until wednesday im gonna shoot myself i am sorry again jack it has beeen a night mare for both of us i apologize bro!!!!!!

Not a problem Dom, I know you are doing everything you can do.

 

[FATJACK]

your going down old man.... you can't handle a 225 Shot out of the hole!:aetsch:


o well lets say a 150 out of the hole and a 100 on the big end:rock:

Yeah, yeah. The only thing I am going down on is the old lady!!!

 

[FerrariTruck]

wow what a flippen mess me and my chassis guy are going rounds the clutch was shipped but not the fly wheel until wednesday im gonna shoot myself i am sorry again jack it has beeen a night mare for both of us i apologize bro!!!!!!

^^^^^^^^^scammer^^^^^^

LOL

 

[Dom426]

^^^^^^^^^scammer^^^^^^

LOL

no money has been given to me so how am i scamming some times its just better to keep your mouth shut especially on sore subjects

 

[FATJACK]

^^^^^^^^^scammer^^^^^^

LOL

Now FT I know you are just bs'ing but Dom has been nothing but great on this deal.:rock: :rock:

 

[Tooloe]

Now FT I know you are just bs'ing but Dom has been nothing but great on this deal.:rock: :rock:

better watch out hes prob just waiting on the nude pictures to get developed of him so he can send them to ya