Viper Heads

[kyle's srt10]

Will these fit on our trucks?
http://cgi.ebay.com/ebaymotors/ws/e...m=250147179196&ssPageName=STRK:MEWA:IT&ih=015

 

[ViperTruck2933]

They should fit. Great find Kyle. I'd be bidding if I didn't already have mine ported by Joe. :rock:

 

[kyle's srt10]

They should fit. Great find Kyle. I'd be bidding if I didn't already have mine ported by Joe. :rock:

I got to thinking maybe I shouldn't have posted this up Because I will be bidding on them Thanks for the info tim:rock:

 

[Cablefed]

Does porting the heads on these engines really increase horsepower that much? I assume a cam is also used to increase the valve lift duration.

 

[6pakattack]

I got to thinking maybe I shouldn't have posted this up Because I will be bidding on them Thanks for the info tim:rock:

I know that feeling all too well !!!You're safe from me,I got put on mod restrictions for awhile !!!Only after I bought a PCM and a set of Boomers wires !!!!

 

[ViperTruck2933]

Does porting the heads on these engines really increase horsepower that much? I assume a cam is also used to increase the valve lift duration.

Yes, porting OEM heads can give anywhere from 30-50 hp. Some say Strikers can give 60-80.:rock:

 

[Annu Kumar]

Will these fit on our trucks?
http://cgi.ebay.com/ebaymotors/ws/e...m=250147179196&ssPageName=STRK:MEWA:IT&ih=015

80 hp for 500.00 bucks sounds good to me. what do you guys think?

 

[Bone]

80 hp for 500.00 bucks sounds good to me. what do you guys think?

I'm sure they will sell for much higher.

Don't forget the install costs (labor, gaskets, fluids, etc.)

 

[Gaboon]

I got to thinking maybe I shouldn't have posted this up Because I will be bidding on them Thanks for the info tim:rock:

Probably not with all the mod whores here

 

[TheMoparConnection]

notice reserve not met either.. and yes they should fit

 

[Ram From Hell]

Some say Strikers can give 60-80.:rock:

...and a full 100 over stock on a Gen II with a cam.

 

[ViperTruck2933]

80 hp for 500.00 bucks sounds good to me. what do you guys think?

From looking at the pics I can't tell if those are OEM heads ported by JM, or if they are the Strikers. If they are the Strikers you are not going to get them for $500. They cost 6K new.

If they are OEMs that are ported by JM, I think they get about 3K-4K for the port work

 

[BlackKnight]

How much hp can be gained by ONLY porting and polishing the heads and port matching the intake runners?

 

[ViperTruck2933]

How much hp can be gained by ONLY porting and polishing the heads and port matching the intake runners?

prolly not much. You need a better cam profile to take advantage of the increase in air flow.:dontknow: