GADodgetech
Full Access Member
Loaded mine with my tool box 
What Did You Do to your Vehicle Today?
- Thread starter Prof
- Start date
Just got the grey truck back from the shop, added Bellanger LT headers hi flow cats and magnaflow catback along with B&M shifter, swapped out the Mopar CAI for the JMB and added a Pace Edwards electric tailgate lock.
The exhaust combo has way to much drone, so this afternoon I bought a Borla catback to swap out the magnaflow, hope this will help.
The B&M shifter is really solid the arm is to short so I will probably convert to the stock hurst arm.
Will keep you posted on the Drone issue!
The exhaust combo has way to much drone, so this afternoon I bought a Borla catback to swap out the magnaflow, hope this will help.
The B&M shifter is really solid the arm is to short so I will probably convert to the stock hurst arm.
Will keep you posted on the Drone issue!
Last edited:
andrew heywood
Full Access Member
Cleaned er...........:rock: :rock:
:rock:
Black1
Full Access Member
Just got done washing and detailing (the inside) of Scott's (Ntw0rk) truck! He's left it in my care until his return from the sandbox in October. ..... Talk about a NICE, clean, well cared-for ride! :rock: It's a honor to take care of this great vehicle for such a GREAT American (and Brother). :congrats:
.... Sorry, no pics. It's too DARK outside. :dontknow:
He's left it in my care until his return from the sandbox in October. ..... Talk about a NICE, clean, well cared-for ride! :rock: It's a honor to take care of this great vehicle for such a GREAT American (and Brother). :congrats:.... Sorry, no pics.
It's too DARK outside. :dontknow:
- Joined
- May 18, 2006
- Messages
- 35,140
- Reaction score
- 13,108
Wow, Jake, that's awesome!!! :congrats: :congrats: Take good care of her for Scotty :rock:
I looked at mine today - I love her so much
I looked at mine today - I love her so much
Coated mine with wax today.
Last edited:
Venom Power
Full Access Member
Stay tuned!! I still have new dimpled and slotted brake rotors from Stinker, new front and back EBC's and entire 6 piece polished billet grills to install this week before the CENTEX GTG... Then, a bath, wax and engine detail will be called for.
I haven't driven her for a month:argh: so today, I gave her a bath and went for a little spin:burnout:
Then put $66 in the tank :dontknow:
Then put $66 in the tank
:dontknow: 
Here is the list:
Stinker power steering steel braid lines
JMB front skid plate
JMB remote battery box
Stainless pumpkin bolts (from Stinker)
JMB Sway bar Polyurethane mounting bushings
Pulling rear axles...leaking again....arrrrrgh! Third set of seals and bearings...checking the axle cases...they must be out of round!
Oh, all being delegated to Westech...too much for my old body to manage.
Stinker power steering steel braid lines
JMB front skid plate
JMB remote battery box
Stainless pumpkin bolts (from Stinker)
JMB Sway bar Polyurethane mounting bushings
Pulling rear axles...leaking again....arrrrrgh! Third set of seals and bearings...checking the axle cases...they must be out of round!
Oh, all being delegated to Westech...too much for my old body to manage.
Last edited:
Venom Power
Full Access Member
Prof said:
BINGO!! I have a slight leak back there too. I figured it would be taken care of whenever I decide to have the 4.56's slapped in there. But for the time being I'm really enjoying 4.10's with 90 m.p.h. speeds in 6th gear turning 1.5K rpms.
Venom Power
Full Access Member
New brake rotors and EBC pads from JTSVP...
New front upper and lower billet grills from Grille Technologies.. (OSO installed it for my lazy azz tho)
Removed that ugly narrow upper firewall blanket thing to reveal hard shiny black plastic.
New front upper and lower billet grills from Grille Technologies.. (OSO installed it for my lazy azz tho)
Removed that ugly narrow upper firewall blanket thing to reveal hard shiny black plastic.
Black1
Full Access Member
Lookin' GOOD, Ant!!! :rock: :rock: :rock:
ANTNEE, ANTWON, AN THO KNEE!!! I gotta jump yer ass bro. I jumped on Paul's ass long enough, and he got off his ass and cleaned his engine bay.
You two have such B-E-A-Utiful rides to over look the engine bay. I promise a LITTLE water won't hurt it!
Otherwise, that shit is bitchin' dude!!!! :rock: :rock: :rock:
You two have such B-E-A-Utiful rides to over look the engine bay. I promise a LITTLE water won't hurt it!
Otherwise, that shit is bitchin' dude!!!! :rock: :rock: :rock:
Venom Power
Full Access Member
Roz-SRT said:ANTNEE, ANTWON, AN THO KNEE!!! I gotta jump yer ass bro. I jumped on Paul's ass long enough, and he got off his ass and cleaned his engine bay.
You two have such B-E-A-Utiful rides to over look the engine bay. I promise a LITTLE water won't hurt it!
Otherwise, that shit is bitchin' dude!!!! :rock: :rock: :rock:
I didn't have a chance to finish up the cleaning today. Believe me it was much worse, with water spots and dirt strewn here and there. For me to get deep up in the bay I need a hoist Jimi... Otherwise the neighbors complain about seeing this...
amtrucker22
Active Member
Roz-SRT said:ANTNEE, ANTWON, AN THO KNEE!!! I gotta jump yer ass bro. I jumped on Paul's ass long enough, and he got off his ass and cleaned his engine bay.
You two have such B-E-A-Utiful rides to over look the engine bay. I promise a LITTLE water won't hurt it!
Otherwise, that shit is bitchin' dude!!!! :rock: :rock: :rock:
ROFLMAO!!!!! Woo-hoo Jimi is not just on my ass
Both cases out of round. Strange, Dana, DTS and Westech working on a solution...and looking for the cause.
Maybe just too much horsepower:rock: :rock: :rock: :rock: :rock: :rock: :rock: :rock: :rock:
Received a call today that I can come in Tuesday morning to have my new, warranty-covered steering wheel installed!!! I can't wait!
Support Us
Become A Supporting Member Today!
