Nowwhat
Full Access Member
There are a lot of members new and old that are researching power mods, hp gains and prices...
for the purposes of creating a general outline that perhaps can become a stickey, please post up what you can. We can fill in the blanks, and maybe come up with a nice accurate list
Obviously there are 10,000 ways to skin a cat perhaps we can boil down the go fast plan to a dozen or so "packages" and bolt ons.
Let's start with a parts list in no particular order. parts only no labor and rwhp gains (realistic)
PART................COST..............RWHP GAIN..........NOTES
C.A.I...................$300..................0-5..................great sound
Drop In Filter........$50-75...............5-8..................more trq then CAI
Cat Back..............$500-$1200........10-15...............great sound
Catless Mids.........$400..................15-20
Longtube Headers..$1700-$2000.......15-20...............big trq and sound
Shortie Headers.....$600-900............0-15................depends on Brand
Stage II Flash.......$900..................10-20...............big gains at lower rpm
VEC III................$1000.................20-40...............big gains at lower rpm
Throttle Body.......$600...................5-10
PACKAGE..........COST INSTALLED....RWHP GAIN........NOTES
Paxton.................$11000-$13000.....175-225
Roe.....................$8000..................175-200
Twin Turbos..........$12000-$40000.....300-800..............built motor needed after 750rwhp
Ported Head/Cam...$7000-$8000........ 75-100...............includes headers+valvetrain
Stryker Head/Cam..$12000................150................... includes headers+valvetrain
Nitrous.................$1000-$8000........100-250..............stock bottom end
Big Nos.................$5000-$10000......250-500..............forged motor
Motor Build............$15000-$25000.....50-75.................good to 1500rwhp
OTHER..............COST INSTALLED....NOTES
Auto Trans Build.....$4000-$9000..........trans good for 700-1500rwhp
Trq converter........$1500-$2500...........2400-2500 stall for slicks
Upgraded Clutch.....$1000-$3000..........handles 5000rpm drops
Rear axle upgrade...$3500-$4000..........slick friendly w/ locker
Caltracs................$400-$500.............big 60' improvement
1) VEC and Flash have tremendous advantages beside rwhp and trq. RC and QC will benefit differently
2) Drag Radials and Slick packages from $600-$1200 depending on rwhp needs....cuts 60' to 1.6x-1.9x
3) Package prices assume professional installers that add correct wires, hoses, breahters, plugs, pushrods etc where applicable
4) STS turbo excluded due to multiple engine failures
5) Hennessey products should be avoided at all costs
for the purposes of creating a general outline that perhaps can become a stickey, please post up what you can. We can fill in the blanks, and maybe come up with a nice accurate list
Obviously there are 10,000 ways to skin a cat perhaps we can boil down the go fast plan to a dozen or so "packages" and bolt ons.
Let's start with a parts list in no particular order. parts only no labor and rwhp gains (realistic)
PART................COST..............RWHP GAIN..........NOTES
C.A.I...................$300..................0-5..................great sound
Drop In Filter........$50-75...............5-8..................more trq then CAI
Cat Back..............$500-$1200........10-15...............great sound
Catless Mids.........$400..................15-20
Longtube Headers..$1700-$2000.......15-20...............big trq and sound
Shortie Headers.....$600-900............0-15................depends on Brand
Stage II Flash.......$900..................10-20...............big gains at lower rpm
VEC III................$1000.................20-40...............big gains at lower rpm
Throttle Body.......$600...................5-10
PACKAGE..........COST INSTALLED....RWHP GAIN........NOTES
Paxton.................$11000-$13000.....175-225
Roe.....................$8000..................175-200
Twin Turbos..........$12000-$40000.....300-800..............built motor needed after 750rwhp
Ported Head/Cam...$7000-$8000........ 75-100...............includes headers+valvetrain
Stryker Head/Cam..$12000................150................... includes headers+valvetrain
Nitrous.................$1000-$8000........100-250..............stock bottom end
Big Nos.................$5000-$10000......250-500..............forged motor
Motor Build............$15000-$25000.....50-75.................good to 1500rwhp
OTHER..............COST INSTALLED....NOTES
Auto Trans Build.....$4000-$9000..........trans good for 700-1500rwhp
Trq converter........$1500-$2500...........2400-2500 stall for slicks
Upgraded Clutch.....$1000-$3000..........handles 5000rpm drops
Rear axle upgrade...$3500-$4000..........slick friendly w/ locker
Caltracs................$400-$500.............big 60' improvement
1) VEC and Flash have tremendous advantages beside rwhp and trq. RC and QC will benefit differently
2) Drag Radials and Slick packages from $600-$1200 depending on rwhp needs....cuts 60' to 1.6x-1.9x
3) Package prices assume professional installers that add correct wires, hoses, breahters, plugs, pushrods etc where applicable
4) STS turbo excluded due to multiple engine failures
5) Hennessey products should be avoided at all costs
Last edited: