How Much Horse Power???

[Dom426]

can you make in a truck Naturally aspirated ???

at the wheel??

And redline???

with race fuel???

and still drive it on pump???

 

[oldcolt]

High 600's with pump gas is doable. :rock::rock:

A HP cam will get you there, but you will loose torque.

 

[VENOMOUS1 RACING]

Yeah I say high 600's too. High compression, tall duration/lift roller cam should get you there.

 

[Ironhead]

I dont know anyone who would do a thing like that

 

[NVR2OLD]

I dont know anyone who would do a thing like that

ONLY YOU.

 

[SRT10VENOMOUS]

Full billet block and all out build a little over 800 rwhp There is a build in Toronto running that now. It's a big bux build.

 

[Dom426]

Full billet block and all out build a little over 800 rwhp There is a build in Toronto running that now. It's a big bux build.

why do you need a billet block?

 

[SRT10VENOMOUS]

why do you need a billet block?

No clue, I'll ask em or put u in touch if your interested.

 

[Dom426]

No clue, I'll ask em or put u in touch if your interested.

we looked into it...but a stock block is good for over 3000k hp and close to 9k rpms

 

[SRT10VENOMOUS]

we looked into it...but a stock block is good for over 3000k hp and close to 9k rpms

I don't think that was the reason "to much hp" I think they were going for a massive cc / ci for u americans increase and stroked set up. Apparently the goal was 1000hp but I have not spoke to him in ages to see where they are or what happened. Las it was at 800 and change at the rw.

 

[SrtBrad]

Full billet block and all out build a little over 800 rwhp There is a build in Toronto running that now. It's a big bux build.

I've heard the same numbers also. Don't know the details but heard there was a 800rwhp build up North.

 

[bigike]

DOM, Congrats on Hot Rod spread/piece! Truck still getting it done!

 

[Dom426]

Thanks jay

 

[Dom426]

I don't think that was the reason "to much hp" I think they were going for a massive cc / ci for u americans increase and stroked set up. Apparently the goal was 1000hp but I have not spoke to him in ages to see where they are or what happened. Las it was at 800 and change at the rw.

Ok makes sense. Thanks for the info ken

 

[Yellow venom]

DOM, Congrats on Hot Rod spread/piece! Truck still getting it done!

Wow your still alive Jay? Lol haven't seen you on here in ages!! When are you getting another 10???

 

[caveman]

why do you need a billet block?

For the same reason we own .50 BMG's: barring the money it takes to have one, why wouldn't you have a billet block?