Search results

Finally done running like a fine-tuned Rolex 14160. How something so simple eluded me for so long. I will post video time for a shower. thewelshm

After changing every sensor ran compression test. no compression on number3. the push rod had not gone into the bucket, so I bent a valve on my new head ...Rookie mistake. ell im getting good at taking these apart and I have a spare rebuilt head. stay tuned.. thewelshm

Update changed Map Sensor, TPS, IAC sensor and the little one in the flex pipe to the air cleaner. No difference last two would be camshaft and crank. But I thought about it and got a better scanner 2 codes came up, number 1 is PO152 O2 sensor bank 2 which makes sense as that would have been the...

NONE. so I a have a new crank sensor, so i will do ALL sensors and see where we go. I put permadex gasket sealer on the stock inlet gaskets as cheap insurance...I Know some will disagree, but I was there no worries. thewelshm thewelshm

Ok its all back together with new gaskets (no leaks) new MAP sensor exactly the same issue I took out the IAC and its solid no movement. I think this may be the culprit, so I ordered one going to change the TPS while there. slowly but surely. thewelshm

ok changed map sensor pulled the inlet and stuck a new gasket in there. going to nip up everything tomorrow and see how we do. Thanks Ronnie stay tuned mate. ....anyone know a good therapist..:) thewelshm

Check engine light came on it feels like it's on 9 cylinders. I checked for spark with the tool, all 10 have spark. putting a set of plugs in tomorrow. its either that sensor, a bad plug, or an inlet manifold leak. good part is its running valve train is quiet. I reset to final dyno tune with...

The truck is running really rich, I'm going to swap TPS and IAC. But I also noticed this one. What is it called and does anyone have a part number? thewelshm

Push rod was wedged pretty good, pulled the head new gaskets on the way. Back to work on it next week. thewelshm

So I'm down to reinstalling rods and rockers and I mistakenly dropped the push rod on number 10 inlet between the gasket and the block, I can see it with the remote camera and bought a bunch o magnetic tool. No luck yet, it's probably head back off deal, unless someone has a retrieval trick, any...

THAT SUCKS MATE, THEWELSHM

this may be better. thewelshm

Picked it up and he did a real nice job for $360.00 the culprit is featured valve seat must have cracked during installation, and gave way 9100 miles later. thewelshm

Gut new bolts, gaskets etc., picking up the head tomorrow mate, im interested to see how it looks. thewelshm

Thanks Ronnie Paul

that exact same thing happened to me mate, check out my posting. The valve seat dislodged, I felt it go onto 9 cylinders, my plug looked like yours. thewelshm

The valve seat came apart, I got the head fixed for $380.00 plus a valve and 20 seals. Piston has some dings but not bad, Im going to lightly sand with a dremmal and see how it looks, Anyone have the torque settings for re install? thewlshm

put a flip kit on the 2006 quad cab

Its not goodbye its see you later.. thewelshm

HEAT Mate thewelshm