420CI HEMI DYNO RESULTS

[LETHAL HEMI]

Big thanks to FLACO for spending alot of time and patience on my truck.


3RD GEAR PULL, 80* WEATHER, 83% HUMIDITY, UNLOCKED CONVERTER, 21* TIMING, ON 22'' WHEELS ( IF IT MATTERS)

DURING THE DYNO DUE TO LACK OF TRANNY CONTROL IN 3RD GEAR LEAVING IT IN DRIVE IT KEPT DOWNSHIFT BY ITSELF AS YOU CAN SEE ON THE DYNO SHEETS
WHICH RESULTS IN SOME LOST OF POWER TO THE WHEELS

[ame=http://www.youtube.com/watch?v=ajmfaxm2fGE]420ci HEMI DYNO- UNLOCKED CONVERTER - YouTube[/ame]



UNLOCKED CONVERTER IF IT WERE LOCKED I COULD'VE GOTTEN OVER 500RWHP EASILY

 

[caveman]

Glad to see you finally got it sorted out. What are the specs on the build? What rear roll-pan and drop kit did you use?

 

[ram_vs_cougar]

Killer numbers man!

 

[LETHAL HEMI]

Glad to see you finally got it sorted out. What are the specs on the build? What rear roll-pan and drop kit did you use?

Still not done with her. My headers arent port match with the heads and i need a bigger TB to let her breath better. I still want E85 to raise the timing i want over 500 all day.

Its a 6.1L based 420ci HEMI, 5.7L eagle heads, Ported 6.1L intake, PWR cam, 4000 stall, 4.56 gears. The drop is a 2/4 my costumized into a 3/5 soon to be a 4/6 drop

 

[Falcon]

Very nice.......awesome build!

 

[rbabody]

:top:nice

 

[ARRESTmeRed04]

the TQ is the most impressive to me, gonna go to the track this weekend?

 

[LETHAL HEMI]

Im thinking about going friday not sure. Its suppose to be a low of 51*

SHould jump out like a sling shot with that much TQ, 4000 stall, 4.56 gears

 

[ARRESTmeRed04]

Im thinking about going friday not sure. Its suppose to be a low of 51*

SHould jump out like a sling shot with that much TQ, 4000 stall, 4.56 gears

4000 seems crazy high to me still, what are you turning it to 7000?

 

[Tonkasmith]

Nice build

 

[LETHAL HEMI]

4000 seems crazy high to me still, what are you turning it to 7000?

Yup thats what flaco set it at..7k

actaully the few running this cam are running 4000-4200 stall and break 1.5x 60ft but in a LX car. Mine according to the opition button on Circle D web page its a 3800-400 so i think its a good size stall

Well find out and if it doenst work ill remove it and figure something out