Engin89
Member
Best drive-ability mod. for the money. If you had to rate mod.'s by like HP, traction, or ride, for the money the JTS Gen 2 is tops. It will feel like a new truck. Has adj. spring for tension too. Worth every dollar.
:rock::rock::rock:
definitely a different build:rock::rock::rock:
i was going to repaint my truck gomango. i regret that i went back to red... especially seeing as i ended up painting 90% of it anyways...
but anyway... cool project...
i'm the asshole that cuts into a DZ302 camaro to put in minitubs and an LS6, so i have no problems with that!
i was going to repaint my truck gomango. i regret that i went back to red... especially seeing as i ended up painting 90% of it anyways...
but anyway... cool project...
i'm the asshole that cuts into a DZ302 camaro to put in minitubs and an LS6, so i have no problems with that!
I try!! LOL..
Anything I do for myself anymore has to be different..
Here is my other truck I'm building for myself, it took second stage for a little while though, while I build the SRT.
It's getting a Fuel Injected slant 6 with side draft throttle bodies, should be a little over 300hp and 400ft lb, not the typical motor you see somebody put in a street rod.
You're going to hide it all, right?
As much as possible.. Pretty much everything you see here on top of the engine should be able to be hidden. I'm not going as far as completely hiding everything though... Such as the wiring harness that goes behind the engine from the factory..
Right now the one that has me stumped is the brake controller, not sure where to hide that just yet.
Find a good local A/C shop that makes lines. If you make your own lines they can pressure test/leak check them for you to avoid any surprises.
Does anybody in here know if I can turn the brake controller on it's side? I have a good hidden location I can put it and I won't have to do much wiring but I will have to mount it on it's side.. Not sure if that is ok or not. And being that I will be building things around it I really need to know for sure.. Anybody???
The ABS pump?