Lowering Blocks are ready...

i looked today ( holidays :D ) to install the blocks....but i see no much more play between axle and the rubber stop-blocks.Do they have to be cut a part ? or does a little travel is enough ? On page 14 there are pics but the rubber stops are not visible.... :confused: :dontknow:
 
belgiumbarry said:
i looked today ( holidays :D ) to install the blocks....but i see no much more play between axle and the rubber stop-blocks.Do they have to be cut a part ? or does a little travel is enough ? On page 14 there are pics but the rubber stops are not visible.... :confused: :dontknow:
Click to expand...

I do not think you need to alter those pads. No one else has had to (so far at least)...
 
installation went NUTZ

ok , had a couple of hours this sundaymorning....so went for the blocks installation... everything went wel ( also had to pry hard... ) , blocks and U-bolts installed.... oeps... nuts ?:dontknow: Thought old ones to use but... different thread ....ok, tomorrow to shop for nuts because all i have is metric...:mad: :D

Steve are the nuts normally with the bolts/blocks ? :dontknow:
 
belgiumbarry said:
ok , had a couple of hours this sundaymorning....so went for the blocks installation... everything went wel ( also had to pry hard... ) , blocks and U-bolts installed.... oeps... nuts ?:dontknow: Thought old ones to use but... different thread ....ok, tomorrow to shop for nuts because all i have is metric...:mad: :D

Steve are the nuts normally with the bolts/blocks ? :dontknow:
Click to expand...

bump..:confused: :dontknow:

PS Steve i have nutz, so i don't ask this you send me nutz....:D :D :D
 
belgiumbarry said:
bump..:confused: :dontknow:

PS Steve i have nutz, so i don't ask this you send me nutz....:D :D :D
Click to expand...
I did not see your first post on this, sorry. Yes, the nuts are supposed to be there. Please send me your address again and we will get them shipped in the AM!!!!!!!!!!!!! I am so sorry about this...:eek: :eek: :eek:
 
Texas Yellow Fever said:
I did not see your first post on this, sorry. Yes, the nuts are supposed to be there. Please send me your address again and we will get them shipped in the AM!!!!!!!!!!!!! I am so sorry about this...:eek: :eek: :eek:
Click to expand...

no need to apologize Steve ! :D , i have it installed now with nuts from the store but couldn't get them on sunday....;)

So no need to send them ! :D

PS Looks GREAT ! :rock: :rock:
 
Whew, that's good news, I'm really sorry about that, but I'm glad you were able to overcome my over sight. Let me know how much you spent and I'll send you the $$$!!!

P.S. Post up some pictures of the new lowered stance!!!!!
 
TYF - I need some lowering blocks 1 inch bigger than the X-Metal blocks which I think they are 2.5 inches, but don't need the u bolts. How much?
 
I think the X-Metal blocks are 2 1/4" :dontknow:

I want to try 3" blocks just for kicks.Sometimes I act as if I am from Missouri,you just have to show me.:D
 
LitemUp said:
TYF - I need some lowering blocks 1 inch bigger than the X-Metal blocks which I think they are 2.5 inches, but don't need the u bolts. How much?
Click to expand...


...........BUMP ............
 
HOT RAM said:
I think the X-Metal blocks are 2 1/4" :dontknow:

I want to try 3" blocks just for kicks.Sometimes I act as if I am from Missouri,you just have to show me.:D
Click to expand...



..............bump................
 
Got the 2" blocks in today....your the man Steve, Thanks. Can't wait to install them
 
Texas Yellow Fever said:
Glad they showed up safe and sound. Post pics when you get them installed!
Click to expand...

Will do. Thanks again!
 
Texas Yellow Fever said:
We built a 1.5" prototype of the lowering blocks, here they are in all their glory (pun intnended). I'm working on a 2.5 set right now (that's already sold) if anyone wants the 1.5 set, they're ready to ship. They'll include the blocks and new U Bolts for a $125...I can do them in any size (1/2 inch increments) from 1/2 inch to 4 inch...these are made out of billet aluminum...oh, one more thing the logos are laser engraved, not painted...

Line up boys...:D :D :D
Click to expand...

Put me down for a set of 1.5,s.
P.M. is sent,Thanks
 
I want a set of 1.75'' but 1.5''-2.0'' will work if there is any?
 
You must log in or register to reply here.

Latest posts

Support Us

Become A Supporting Member Today!

Click Here For Details

Random Media

IMG 20130731 154046 206
IMG 1050[1]
20130201 170727
2011 06 16 17 06 45 974
Back
Top