Lowering Blocks are ready...

[belgiumbarry]

i looked today ( holidays ) to install the blocks....but i see no much more play between axle and the rubber stop-blocks.Do they have to be cut a part ? or does a little travel is enough ? On page 14 there are pics but the rubber stops are not visible.... :dontknow:

 

[Texas Yellow Fever]

i looked today ( holidays ) to install the blocks....but i see no much more play between axle and the rubber stop-blocks.Do they have to be cut a part ? or does a little travel is enough ? On page 14 there are pics but the rubber stops are not visible.... :dontknow:

I do not think you need to alter those pads. No one else has had to (so far at least)...

 

[belgiumbarry]

installation went NUTZ

ok , had a couple of hours this sundaymorning....so went for the blocks installation... everything went wel ( also had to pry hard... ) , blocks and U-bolts installed.... oeps... nuts ?:dontknow: Thought old ones to use but... different thread ....ok, tomorrow to shop for nuts because all i have is metric...

Steve are the nuts normally with the bolts/blocks ? :dontknow:

 

[belgiumbarry]

ok , had a couple of hours this sundaymorning....so went for the blocks installation... everything went wel ( also had to pry hard... ) , blocks and U-bolts installed.... oeps... nuts ?:dontknow: Thought old ones to use but... different thread ....ok, tomorrow to shop for nuts because all i have is metric...

Steve are the nuts normally with the bolts/blocks ? :dontknow:

bump.. :dontknow:

PS Steve i have nutz, so i don't ask this you send me nutz....

 

[Texas Yellow Fever]

bump.. :dontknow:

PS Steve i have nutz, so i don't ask this you send me nutz....

I did not see your first post on this, sorry. Yes, the nuts are supposed to be there. Please send me your address again and we will get them shipped in the AM!!!!!!!!!!!!! I am so sorry about this...

 

[belgiumbarry]

I did not see your first post on this, sorry. Yes, the nuts are supposed to be there. Please send me your address again and we will get them shipped in the AM!!!!!!!!!!!!! I am so sorry about this...

no need to apologize Steve ! , i have it installed now with nuts from the store but couldn't get them on sunday....

So no need to send them !

PS Looks GREAT ! :rock: :rock:

 

[Texas Yellow Fever]

Whew, that's good news, I'm really sorry about that, but I'm glad you were able to overcome my over sight. Let me know how much you spent and I'll send you the $$$!!!

P.S. Post up some pictures of the new lowered stance!!!!!

 

[LitemUp]

TYF - I need some lowering blocks 1 inch bigger than the X-Metal blocks which I think they are 2.5 inches, but don't need the u bolts. How much?

 

[HOT RAM]

I think the X-Metal blocks are 2 1/4" :dontknow:

I want to try 3" blocks just for kicks.Sometimes I act as if I am from Missouri,you just have to show me.

 

[HOT RAM]

TYF - I need some lowering blocks 1 inch bigger than the X-Metal blocks which I think they are 2.5 inches, but don't need the u bolts. How much?

...........BUMP ............

 

[HOT RAM]

I think the X-Metal blocks are 2 1/4" :dontknow:

I want to try 3" blocks just for kicks.Sometimes I act as if I am from Missouri,you just have to show me.

..............bump................

 

[alexspop]

Got the 2" blocks in today....your the man Steve, Thanks. Can't wait to install them

 

[Texas Yellow Fever]

Got the 2" blocks in today....your the man Steve, Thanks. Can't wait to install them

Glad they showed up safe and sound. Post pics when you get them installed!

 

[alexspop]

Glad they showed up safe and sound. Post pics when you get them installed!

Will do. Thanks again!

 

[1qksrt]

We built a 1.5" prototype of the lowering blocks, here they are in all their glory (pun intnended). I'm working on a 2.5 set right now (that's already sold) if anyone wants the 1.5 set, they're ready to ship. They'll include the blocks and new U Bolts for a $125...I can do them in any size (1/2 inch increments) from 1/2 inch to 4 inch...these are made out of billet aluminum...oh, one more thing the logos are laser engraved, not painted...

Line up boys...

Put me down for a set of 1.5,s.
P.M. is sent,Thanks

 

[TXVIPERPWRD]

I would like to get a set of the 1.5" lowering blocks. PM sent.

Thanks

 

[SRT/10-AMSTERDAM]

Any pictures of Quad cab's with 2" lowering blocks :questionmark:
I like to see the new stance.

 

[Carlwalski]

Anyone got some spare or new 1.5" rear RC lowering blocks!?!

 

[500snakz]

I want a set of 1.75'' but 1.5''-2.0'' will work if there is any?

 

[Texas Yellow Fever]

We do not make these any longer, sorry.