Northeast GTG

Yeah but finding the time between the f'in' snow is the hard part, heres my list if I can remember everything.....
Volant
ROE TB
Radiator hard pipe, snakeskin
Thermostat, 170*
Mid pipes;DONE
Stage2 PCM,B&G;DONE
Oil cooler lines
Mirrors and CF handle covers
Rear lowering blocks, JTSVP
POLY sway bar bushings
Intake powdercoating
Snakeskin dipped valve covers
Coil packs, wires and plugs
Polishing the wheels
GreenStuff pads front and rear
Shifter handle
Viper floor mats
BT Catch can
I think that's it, but a big list to get done by the 11th if this weather doesn't get better and a little warmer.
OH, hood liner removed, cleaned and reinstalled too...............

Damn Hawk! I think I'm going to have the most plain-Jane trucks at this gathering.
 
And a V1R pulley, almost forgot. That's if I can get it done by then...
 
I think I'm going to have the most plain-Jane trucks at this gathering.

That could be me.:(. I am trying though. We have a trip planed mid April to St. Kitts for 10 days so that throws in a wrench.

Thanks for confirming the date. We have to arrange the sitter for the mutskies even though they would love to come along.

B
 
May 11th is the date guys .......... Hawk PM me and I'll see if I can get down there to help you out. I have to work the 14th but other weekends are open. I would love to bring the truck.

oh here's a few mods I have ......... Stealth plane jane don't matter Bud it's a 10 aint it ...

Performance
5 Tube Ceramic Coated Bassani Headers
3.0” JMB Mid Pipes with High Flow Cats
3.0” Magnaflow Exhaust w/4” Exits
X-Metal 74 mm Throttle Body
Centerforce Dual friction Clutch and Press-Plate
All Steel Viper Slave Cylinder upgrade
SCT – Tune – w/Max. HP Tune – Dyno Reference
Powdered Red JMB Cold Air Induction Kit w/Catch can
Performance Friction carbon metallic Brake Pads
B & M short throw 6 Speed narrow pattern shifter
170 Deg T-stat w/powdered red housing
JTVSP Hi-performance coils, and Plug wires
JTVSP Plug wire loom kit

Suspension:
Rear Drop - Lowered 2.5”
Front Drop - Lowered 1.5”
With JMB Powdered Red End link drop kit’s
Cal-Trac Powdered Red Traction Bars
Exterior
MV Performance Viper Louvered Hood
Billet Chrome Hood Grille
Viper Powered Hood Labels - Gold on Black
JMB Hood Skull Emblem - Black on Gold
Rear Bed Strips w/Viper Skull – Gold on Black
Viper Skull Rear Window Graphic – Gold on Red
Tailgate Viper Lettering – Gold on Red
Plain License Plate Frame – Gold
Antenna Spacer Flame Red
All Dodge Badges removed – one on Tailgate SRT-10
Tint = 5% Rear Window – 15% Side Windows
Black Roll-and-Lock Bed Cover & Powdered Black Roll Cover
JTVSP Venom Rim Center Caps w/Viper Skull Red inset
Wiperless windshield w/Black stud caps
Dual Cal-Vue Powered/heated Mirrors – Red
Recon Digital Smoked Tail lights
Recon Night Shaded 3rd Brake light
Recon Projector Smoked Headlights w/Halo’s
Recon Smoked Halo fog lights
Triple Gauge Pod w/ Oil Temp, Shift Light-RPM, Multi-Gauge.

Under Hood Stuff
JMB Radiator Cover Brushed Stainless/Red lettering
JMB Fuse Box Cover Brushed Stainless/Red lettering
Under Hood Chrome Bolt dress up kit
Chrome Viper Skull Oil Filler Cap
Chrome Viper Skull Dip stick handle
All Reservoirs Painted High Gloss Black
6 Reservoir Covers are Turned Brass w/ clear coat
Chrome top of the motor bolt kit
Billet Chrome Hood Strut Covers
Polished Stainless “Viper” Valve Cover Lettering
Powdered Red T-stat Housing
Powdered Red Top Rad. Hard Pipe
Billet Chrome Gas Cable Bracket
Black Powdered Intake w/Viper Graphics
Braided JTVSP Oil Lines
Braided JTVSP Power Steering Lines
JTVSP Hi-Temp Red Boot Covers

Jim
 
F#CK ME RUN'N!!! My truck is going to look stock compared to you guys lol! Can't wait to see you guys trucks!!!!
 
F#CK ME RUN'N!!! My truck is going to look stock compared to you guys lol! Can't wait to see you guys trucks!!!!

don't worry about it, we can park next to each other in our "stock" trucks. Mine is damn near stock too. :D
 
My list has barely begun so not sure what may be done by then but anyone who has seen pics of Jim's 10, well it's in a league of it's own..... .. I'll be there with whatever is ready on mine.
 
This forum is a Damn curse! It has this magical way of emptying my bank account!:dontknow:
 
YUP! No more money and a lot of boxes!!!!!! LOL OH and no time due to cold windy weather!!!!!!!!!!!!!!!!!!!!!!!!!!
 
Hopefully this crap weather ends soon Jim!!!!!!!!...............
 
Look you guys it don't matter on Mods ............ We are all a work in progress, I just started sooner, it's taken me over 7 years to get to this point and I still got s--t I want to do. It's all about the Trucks. A 10 is a 10 .... I use to get butterflies in the Belly when I drove it after I bought it, and I still do ...... so don't fret about mods they will come. I can help with some things like vinyl banners and graphics and any info I can share. Tony and so many other guys on the forum are great folks to pick brains as well.

So lets have a Great GTG meet some guys that share the same interests in these outstanding trucks. Take pics and have a great time.

Jim
 
Hopefully this crap weather ends soon Jim!!!!!!!!...............

Amen to that Hawk ............ Looks like not a bad week coming up all in middle to high 40's may even crack 50 here or there. I'm lookin to get mine out of storage next weekend and spend a few days cleaning her up. I still got a set of smoked Halo fogs I have to install. It can't last like this muck longer so keep the faith guys.

Jim
 
I have an idea for my windshield banner so we will be talking about that too...........
 
Outstanding Ralphie ------ looking forward to it Bud ......

JimTeTe
Hawk02
Stealth78
Vprpwrd
Srt2slow
Chewbacca
Bwellmaker
Bad06srt10
LightningRaper
SRT-10 Ralph
Juan O.
LB3711

Keep them coming guys ....

Jim
 
UIH,

As long as there is beer I am good.

"Work in progress" yes. My truck has sat in the garage since I bought it 2/05 and I am just starting mods.

Bottom line,

We drive Bad Azzzz Trucks no mater what stage of performance.

B
 

Latest posts

Support Us

Become A Supporting Member Today!

Click Here For Details

Back
Top