ProblemS with the truck

If I were there, the first thing I'd do is pull all the plugs and see if they're wet. Then I'd fire it up for a quick listen to the injectors with a stethoscope. If they're all clicking, they're fine and the VEC is working. If they're not, call me.
Then I would use a scan tool to see if the O2 sensors are working. If they're not, it will affect how the PCM sets the fuel and the VEC uses that input.
I'd also check over everything visually (as it sounds like you did).
If you're using the standard SC injectors, you can unplug the VEC and plug all the stock wires back together. The injectors are not so huge that it will flood the engine if the stock PCM runs them.
Assuming all this is water related, when it's all dried out and the oil changed, consider getting the SCT and MAP sensor from us instead. The VEC served a purpose when there was no other option available. Its still a good piece and you should be able to damn near wash out between selling it as a used one and getting an SCT with 2 bar MAP sensor.
If the VEC does need something, we can get you taken care of.

Regards,
Sean
 
Sean..........I wouldnt trade my vec for an SCT, it just plain rocks bud:rock: :rock: :rock: :rock:


endless tunes???????? love it:D
 
The guys from A&C came and got the truck today:( We had to drive it a short distance to get it to a spot where we could load it up... it was smoking like a train. They're gonna start on it tomorrow, so I should know what the deal is soon.
 
SrtBrad said:
Brad I have a Vec3 with your name on it if you need one. It's at Patrick's (RedSrt007) house in San Diego. If you need it it yours to keep at no charge. Hang in there bro.

Thanks man:rock: That's very generous of you:congrats: ... I'll let you know, but it won't be no charge
 
LoveThisTruck said:
Thanks man:rock: That's very generous of you:congrats: ... I'll let you know, but it won't be no charge
gonna dream a sweet dream for ya tonight bo:rock: I hope you'll be fine, and think you will, you like gerbals:p
 
Stinker said:
gonna dream a sweet dream for ya tonight bo:rock: I hope you'll be fine, and think you will, you like gerbals:p

LOL thanks Tony. Have you gone any buisness with or heard anything about A&C Performance? They seem to know their shit, and most definatly didn't waste any time getting the truck. I haden't ever heard of them till David told me:dontknow:
 
LoveThisTruck said:
LOL thanks Tony. Have you gone any buisness with or heard anything about A&C Performance? They seem to know their shit, and most definatly didn't waste any time getting the truck. I haden't ever heard of them till David told me:dontknow:
sure havent bo, not at all:dontknow:

but if david reccommended them they must be top notch bud:rock:

if ya hear anything , give us a hollar:)
 
Hopefully they are'nt to coiny.............sarge U heard, or called...........yet....:D ..it's gunna be ok...that perdy silver viper ram is gittin lotsa love......:rock: :D :rock:
 
Brad, everything is getting sorted out. Smoke is cleared and truck will be clean and ready to go next week! :)

David Weaver is top notch, and ART built you a top notch motor. I'm glad we were able to help out. You can stop worrying and sleep good this weekend :)

Todd
 
todd abrams said:
Brad, everything is getting sorted out. Smoke is cleared and truck will be clean and ready to go next week! :)

David Weaver is top notch, and ART built you a top notch motor. I'm glad we were able to help out. You can stop worrying and sleep good this weekend :)

Todd

:rock: Thanks man.

I'll give you a call on Monday... enjoy you weekend
 
Well, what was the problem????? Inquiring minds want to know.
 
is she fixed ?????? :dontknow: :rock: :dontknow: :burnout: :dontknow: :burnout: :congrats:
 

Support Us

Become A Supporting Member Today!

Click Here For Details

Back
Top