ROUSH MUSTANG STAGE 3 (ANYCHANCE?)

SANCHOBA

TEXAS A&M DAD
Supporting Member
Joined
May 19, 2006
Messages
3,821
Reaction score
0
Location
INGLESIDE,TX.
drove up alongside a roush mustang stage 3 with the 427 (new model)...would it be a race?:dontknow: he wanted to play but there was a lot of traffic, maybe some other time.:p
 
I believe the 427 refers to either the horsepower or torque rating of the engine rather than cubic inches. If he is on street tires then it will be fun.
 
Do the math..... How many pounds per hp.....?

The only question left is: "Can he drive....?"

D
 
You're gonna get your ass kicked if you race that car! I drove one a few weeks ago they're fast!!!
 
WizzySRT10 said:
You're gonna get your ass kicked if you race that car! I drove one a few weeks ago they're fast!!!

I didn't wanna be the one to say it, bro......

I tried to use/ellicit a simple mathematical conclusion.

Thanks....

D
 
SANCHOBA said:
drove up alongside a roush mustang stage 3 with the 427 (new model)...would it be a race?:dontknow: he wanted to play but there was a lot of traffic, maybe some other time.:p


427 cubic inches and 427 horsepower.
3600 pounds WITH driver. Low/Mid 13s (108 'ish) at sea level, according to tests and
from what I've seen.
 
Last edited:
looked at the link..its some what confusing. write up says 435 h.p.,plaque in engine comp. says 427 h.p. ( or is that for an "R")
 
Last edited:
Went to the Roush site, it is a 4.6 litre (281 cubic inch) 435HP supercharged engine....Hell I just beat a 500 Hp Shelby (Supercharged) because he was on street tires and I even missed third gear! See the "Killed a Shelby..Barely " posting in the racing section. I had Drag Radials and would have beat him by 5 lengths or more had I not missed third. This was at a Drag Strip not a street race. I have a 2004 RC with Headers, Magnaflow, 4.56 gears and a DC Tune.
 
Trainman said:
Went to the Roush site, it is a 4.6 litre (281 cubic inch) 435HP supercharged engine....Hell I just beat a 500 Hp Shelby (Supercharged) because he was on street tires and I even missed third gear! See the "Killed a Shelby..Barely " posting in the racing section. I had Drag Radials and would have beat him by 5 lengths or more had I not missed third. This was at a Drag Strip not a street race. I have a 2004 RC with Headers, Magnaflow, 4.56 gears and a DC Tune.
granted u beat the driver,but if hes goin from a roll i dont see how its even close against a stock truck
 
Pretyflywiteguy said:
thats not that impressive..

*edit* did a google search and you're way off...

http://www.roushperformance.com/mustang_427r.shtml

Aughhh.. What info is way off ET? MPH? Weight? :dontknow:

Displacement.... o.k. (I'm not a Ford Guy). I was only going by what a FORD salesman told me on the weekend; you just can't trust them!

I'd race him (her?) anyway if I was Sanchoba.
 
Last edited:
Where is SRTBRAD on this??? He took a 427R twice on the strip at Sacramento Raceway back in October, I believe. It was close, but he took him. This was in his red QC.
 
ViperBite said:
Where is SRTBRAD on this??? He took a 427R twice on the strip at Sacramento Raceway back in October, I believe. It was close, but he took him. This was in his red QC.
wasnt he spraying?
 

Support Us

Become A Supporting Member Today!

Click Here For Details

Back
Top