Striker Cam

[Ironhead]

what is the part number on that cam and is this cam a match for a set of stryker heads ,,,,Ronnie ???

 

[05srt10carson]

Here is a link
http://www.vtcoa.com/forums/f7/striker-48307/

 

[Ironhead]

i see no part numbers listed just disccusion

 

[rottenronnie]

There is no part number listed for it because it is not an off-the-shelf grind, it is a one-off custom grind.
It seems to work fine with the factory heads but it will work very well with a set of Strikers.

 

[Ironhead]

There is no part number listed for it because it is not an off-the-shelf grind, it is a one-off custom grind.
It seems to work fine with the factory heads but it will work very well with a set of Strikers.

i am a proud owner of strykers now and plan on putting them on the fordged engine i plan on putting in me sled do strkers raise compression any ... thinking on the headgasket that is a tad smaller stink says it raised compression to 10.1 or 3 ,,not sure i could use them on a stryker or not :dontknow:

do you have spec for the cam i would love to see them you know