The Engine Build

[Kiwi SRT10]

Sometimes even Pistons need to lay down and sleep

They need to catch some beauty sleep, she's a long road ahead.

Injectors pump arrived today. Thanks to Torrie and the New Tune is sitting, or standing, in my laptop ready to plug into the Obewan Kenobe Port

 

[Wifey]

Getting er done!! Yayyy

 

[VIPR PWR]

They need to catch some beauty sleep, she's a long road ahead.

Injectors pump arrived today. Thanks to Torrie and the New Tune is sitting, or standing, in my laptop ready to plug into the Obewan Kenobe Port
View attachment 68340

Nice , those are pertty teef you got there .. Just wait till they spit out the toof paste with Torries Tune ..

 

[VIPR PWR]

Nice , those are pertty teef you got there .. Just wait till they spit out the toof paste with Torries Tune ..

I was hoping to see the plum crazy purple injectors hahaha

 

[Kiwi SRT10]

Wrapped the other set of headers

 

[Wifey]

Wrapped the other set of headers

View attachment 68342

That's very meticulously done! Good job

 

[VIPR PWR]

Wrapped the other set of headers

View attachment 68342

Hey you missed a spot hahaha l. Looks good and tight

 

[VIPR PWR]

Here you go @Kiwi SRT10 the perfect compliment to the 10 before the engine goes in ..Oh my the possibillities hahaha

 

[05 Red]

Wrapped the other set of headers

View attachment 68342

wish i had time to wrap mine b4 they went on.

 

[Kiwi SRT10]

wish i had time to wrap mine b4 they went on.

There is no guarantee I can get them back on with that stuff on them......but ya have ta try

 

[Wifey]

wish i had time to wrap mine b4 they went on.

There is no guarantee I can get them back on with that stuff on them......but ya have ta try

Uhhh ohhh! That would be a drag

 

[Kiwi SRT10]

Getting there.
The cam was degreed and found only .5 a degree out. Can't complain about that.
Valve to piston clearance checked. Plenty good.
The pushrods are a smidge long to get the roller pattern in the middle of valve stem. So instead of 7.600" we will use 7.500" which gave us the exact roller pattern on the valve stem.
It is starting to look very serious.

 

[Wifey]

Getting there.
The cam was degreed and found only .5 a degree out. Can't complain about that.
Valve to piston clearance checked. Plenty good.
The pushrods are a smidge long to get the roller pattern in the middle of valve stem. So instead of 7.600" we will use 7.500" which gave us the exact roller pattern on the valve stem.
It is starting to look very serious.

View attachment 68347View attachment 68348View attachment 68349View attachment 68350View attachment 68351View attachment 68352

Very nice!!!

 

[Kiwi SRT10]

Ronnie was right 7.600" pushrods are too long, but 7.400" is also too short.
That is why I have my engine man check every detail.

 

[Wifey]

Ronnie was right 7.600" pushrods are too long, but 7.400" is also too short.
That is why I have my engine man check every detail.

Absolutely!

 

[VIPR PWR]

Getting there.
The cam was degreed and found only .5 a degree out. Can't complain about that.
Valve to piston clearance checked. Plenty good.
The pushrods are a smidge long to get the roller pattern in the middle of valve stem. So instead of 7.600" we will use 7.500" which gave us the exact roller pattern on the valve stem.
It is starting to look very serious.

View attachment 68347View attachment 68348View attachment 68349View attachment 68350View attachment 68351View attachment 68352

Oh ,,now that is looking like a lot of progress ... SWEEEEEEET !
Looks,like you polished up the head chambers ??

 

[VIPR PWR]

Ronnie was right 7.600" pushrods are too long, but 7.400" is also too short.
That is why I have my engine man check every detail.

Verification is always a life saver .. Peppermint or Spearament ? Your choice ! Hahaha

 

[Wifey]

Verification is always a life saver .. Peppermint or Spearament ? Your choice ! Hahaha

With doublemint you get the twins! Hahahaha

 

[VIPR PWR]

With doublemint you get the twins! Hahahaha

Oh yeah ,, but the twins are now old and chewed up hahaha

 

[Wifey]

Oh yeah ,, but the teins are now old and chewed up hahaha

Hahahaha! That's not nice!