US Armed Forces - Group Purchase AP4 Panther Carbine

FYI, a few people ordered the lowers saying "safe" and "Zombie", instead of "safe" and "fire". (With the Double Stars)
 
attachments :eek:
 

Attachments

  • ar2.jpg
    ar2.jpg
    310.7 KB · Views: 71
Last edited:
My unit may be ordering another round of these. Overwhelming demand on last order. At least a 1/3 of our unit is deployed at any one time, so some missed out on it too. I barely got into after returning.
 
My unit may be ordering another round of these. Overwhelming demand on last order. At least a 1/3 of our unit is deployed at any one time, so some missed out on it too. I barely got into after returning.

Send me a PM...I'm down!:rock::rock::rock:
 
My unit may be ordering another round of these. Overwhelming demand on last order. At least a 1/3 of our unit is deployed at any one time, so some missed out on it too. I barely got into after returning.

Count me in !!!!!!! I have a friend with FFL to ship it to.
BTW , I am prior active duty Army,so no worries.
 
Can any of these be updated to a class 3 status....
 
Can any of these be updated to a class 3 status....

They can, but they would have to remain within the unit. These are for personal possession at home.
 
Last edited:
Count me in !!!!!!! I have a friend with FFL to ship it to.
BTW , I am prior active duty Army,so no worries.

I haven't talked with our POC yet, but if it is the same as earlier this spring, they all will be shipped free to Oakridge in Warner Robins. After that, you can have them reshipped to a FFL, or pick them up here. Part of the deal with DPMS, is that it is a bulk order to 1 FFL only. Oakridge gives us a huge break on the paperwork and transfer....last time it was only 10 bucks. Can't beat that. Many places will start at 100 bucks and up.

Let me confirm that it is going again before you make any plans. I spent most of the day with the Dental Hobby Shop.

Also, DPMS only charged us 10 extra to have an unit patch on the weapon. With enough requests of the same patch, say a VTCOA or similar, they may do it again.
 
I haven't talked with our POC yet, but if it is the same as earlier this spring, they all will be shipped free to Oakridge in Warner Robins. After that, you can have them reshipped to a FFL, or pick them up here. Part of the deal with DPMS, is that it is a bulk order to 1 FFL only. Oakridge gives us a huge break on the paperwork and transfer....last time it was only 10 bucks. Can't beat that. Many places will start at 100 bucks and up.

Let me confirm that it is going again before you make any plans. I spent most of the day with the Dental Hobby Shop.

Also, DPMS only charged us 10 extra to have an unit patch on the weapon. With enough requests of the same patch, say a VTCOA or similar, they may do it again.

Daddy Likey!!!!:D:D:D
 
I haven't talked with our POC yet, but if it is the same as earlier this spring, they all will be shipped free to Oakridge in Warner Robins. After that, you can have them reshipped to a FFL, or pick them up here. Part of the deal with DPMS, is that it is a bulk order to 1 FFL only. Oakridge gives us a huge break on the paperwork and transfer....last time it was only 10 bucks. Can't beat that. Many places will start at 100 bucks and up.

Let me confirm that it is going again before you make any plans. I spent most of the day with the Dental Hobby Shop.

Also, DPMS only charged us 10 extra to have an unit patch on the weapon. With enough requests of the same patch, say a VTCOA or similar, they may do it again.

THANKS !!
:rock::rock::rock::rock::rock::rock::rock:
 
Yes, it's back on.

I will send the details when I get it. Probably close to the same as before posted.

No patch this time.

POC will be one of my MXS Chiefs. I'll PM his email when I get details.
 
Christmas holidays I will go shooting if anyone wants to shoot my AP4.
 
I go in to work in a few minutes....I'll see if there are any details.

This is the FFL DPMS will initially ship to:

Oakridge Custom Finishing
700 Feagin Mill Road
Warner Robins, GA 31088
We’re on the Web!
www.OakridgeCustomFinishing.com
Visit us on Facebook too!
Phone: 478-225-9191
Fax: 478-225-9901
E-mail:
[email protected]
Your DuraCoat Specialists!
 
For the non-military guys, we can get you one by putting an extra one on our (a mil guy ordering) credit card and then resell over to you. As long as your State allows this weapon. CA may have some issues on the magazines?
 
OK, here it is, I will quote our POC first and then explain what I setup for out of town shipment, it will vary slightly.

Subject: DPMS Order

To All,

We are making another DPMS order at the end of the month. I spoke with DPMS
today and w/o engraving our weapons will ship fast, estimating a few weeks.

Here are the details:

DPMS is offering two different calibers 5.56 and .308 and both come in two
configurations, standard [RFLR-GPO(.308), RFA2-GPO(5.56)] and with quad
rails attached [RFLR-GPO4R(.308), RFA2-GPO4R(5.56)]. Basically, you're
paying $75 for the quad rails(w/o pads), which is a good deal, they normally
run $149. We can mix calibers, so if you want a .308 and 5.56 you can order
both on one form and as many as you wish.

Oakridge Customs will be receiving our order and they charge $15 FFL
transfer fee.

-If you don't have a Georgia drivers license, you need to bring a
copy of your orders and 2 picture IDs.

-Georgia residence need to bring 2 picture IDs.

Attached is the order form, fill out all information, these weapons will not
have engraving, so we get $10 off the listed price.so if you order
RFA2-GPO(5.56)- you pay $769 + $15 at Oakridge Customs = $784, at the
bottom of the form write in the T-Shirt size.

I'm the POC for this order and I'll be sending it out on 31 January. Please
make sure I have your completed order form by 31 Jan. The order form must
be printed and filled out. Bring me a hard copy with your signature on it.
There is sensitive information required (ie Credit Card info) so I will keep
all order forms locked up until I mail them in. I'll send out notification
as our order is shipped. I will also have the FFL transfer paperwork for
you to pick up, prior to going to Oakridge.

Also, after talking with DPMS, for the deployed members, a signed, scanned,
and emailed copy will be acceptable. Please ensure everyone includes a copy
of their LES for state residency purposes. Feel free to pass this on to any
others you think would be interested in ordering a rifle.

If you have any questions, please give me a call.

V/r

Chief

Ronny W

For out of town orders you will have to get your information to Ronny in some fashion. He will submit to DPMS as a group. I will PM you his information (and mine), please don't fill up my VTCOA mailbox with PM questions.

Ronny is not making a dime on the purchase. Please be patient with him due to the numerous orders he is making and questions he is fielding for us and members deployed.

What I arranged with Oakridge Custom Finishing, the FFL in Warner Robins, GA, is that they received it as the group order then mail to a FFL of your choice. The shipping to Oakridge is free due to the military sale and there is no sales tax. The shipping/handling/fee to your FFL should average about 40 dollars total. Will need to coordinate with Oakridge (Gary or his wife Lexie). They are very down to earth, military friendly people and will go out of their way to help you with the order on their end. Once again, Ronny Wilder is our POC for DPMS and should direct questions to him on the product and purchase. The two forms of IDs or weapons license are for Georgia recipients. So in turn, with your receiving FFL you will have to provide proper respective ID. What DPMS needs is the order form and a credit card number for the purchase.

http://oakridgecustomfinishing.com/

Please don't ask me to put it on my credit card, my wife got upset last time at the $7K+ CC bill and read me the riot act. I'm sure one of these fine military VTCOA members can help you out.

Unfortunately, the site will not allow me to upload the order form or pdf of weapons. So you will have to PM me your email address.
 

Latest posts

Support Us

Become A Supporting Member Today!

Click Here For Details

Back
Top