yellowfever#154
Full Access Member
amtrucker22 said:
Not if you have a torch.
Burn em out!
What Did You Do to your Vehicle Today?
- Thread starter Prof
- Start date
Not if you have a torch.
Burn em out!
Exo
Full Access Member
yellowfever#154 said:Not if you have a torch.
Actually went to a friends shop that had a press. Made it a bit easier but he didn't really have it set up to press out bushing so there was a bit of farmer rigging going on.
Checked for holes in us a few times when a socket that we were using to press the bushing out went flying across the room.:marchmellow:2800 rpm launch with my slicks on with no spin. Going to see what it is like with my normal tires on tomorrow if we don't have a foot of snow on the ground.
Begood
Full Access Member
Mine is still setting in the garage, because it is still raining here.
Bill.
Bill.
cobraken
Full Access Member
For the qc: Put a sct tune from DC Performance in. Installed a tailgate dampner.
71dusterjon
Full Access Member
been finding excuses to drive the truck all day.
yesterday i removed the driveshaft, exhaust, exhaust manifold, the rest of the front bumper cover. drained the tranny fluid, oil, and water. removed the upper and lower radiator hoses, removed the ac condensor, stock air box, extra battery tray. today i washed dawns challenger, vacuumed the inside and wiped down the leather and plastic. got to haul off the old exhaust parts and dump the trash cans in the shop. got to swap batteries in the boat in a bit. fixin to be time for a beer
no time for beereddie102870 said:yesterday i removed the driveshaft, exhaust, exhaust manifold, the rest of the front bumper cover. drained the tranny fluid, oil, and water. removed the upper and lower radiator hoses, removed the ac condensor, stock air box, extra battery tray. today i washed dawns challenger, vacuumed the inside and wiped down the leather and plastic. got to haul off the old exhaust parts and dump the trash cans in the shop. got to swap batteries in the boat in a bit. fixin to be time for a beer
I got your tranny loaded up , now get to work
yellowfever#154
Full Access Member
Exo said:Actually went to a friends shop that had a press. Made it a bit easier but he didn't really have it set up to press out bushing so there was a bit of farmer rigging going on.
2800 rpm launch with my slicks on with no spin. Going to see what it is like with my normal tires on tomorrow if we don't have a foot of snow on the ground.
I did the same thing with the press and luckly I didnt put a hole in myself or my brother. I just decided to take them outside, light them on fire and walk away for about 5 mins, then they can fall right out. How you make out with the normal tires? Hasnt snowed in Lacombe yet has it? I think it is in Calgary though.
trubuilt
Full Access Member
Yep left my truck in front of my gf's house and it had snowyellowfever#154 said:
on it this morning
yellowfever#154
Full Access Member
trubuilt said:Yep left my truck in front of my gf's house and it had snow
That sucks, I got snowed on in Montana when I was bringing the truck home after I bought it.
Hey I have your wheel center caps by the way. They are in Lacombe at my old mans shop. How do you want me to get them to you?
just looked at it
Tooloe
Full Access Member
Today I Instaled JMB Catch can.. and ordered an Dual Gauge Pod and A/F Ratio Gauge! from the STINK MAster
Exo
Full Access Member
yellowfever#154 said:
hasn't snowed yet but is has been misty all day so I won't be able to test till it drys up.
Tooloe
Full Access Member
Ironhead said:i just put truck up on stands and pulled wheels off front end and removed the wheel wells to start long tube header install
you ever get a buyer for the shorties?.. i need some for my turbo set up
Tooloe said:
i am planning on posting them and the mids as a combo ,,if they dont sell i will sell them seperate after that ,,i should have them off here in about a couple hours ,,and will post up some pics ,,,
i was going to go to a cook out and decided to stay home and do this ,,i am missing antnees brisket to do this ,,so i may have to ad a sir charge for lack of brisket
Last edited:
71dusterjon
Full Access Member
bored as hell today so i decided to make the rest of the cab black. got some suede and wrapped the headliner and then painted the plastic for the pillars black. have to paint the dome lights and i'll be done. definitely better looking.
done yet???????????????????????????????Ironhead said:i am planning on posting them and the mids as a combo ,,if they dont sell i will sell them seperate after that ,,i should have them off here in about a couple hours ,,and will post up some pics ,,,
i was going to go to a cook out and decided to stay home and do this ,,i am missing antnees brisket to do this ,,so i may have to ad a sir charge for lack of brisket
Stinker said:done yet???????????????????????????????
long tube headers are on got shit back in place that i had to remove only thing i got to do tommorrow is install mids and put tires back on ,,,but the ball busting part is done :rock:got to hit shower and get some shut eye
Last edited:
Support Us
Become A Supporting Member Today!
