Good afternoon, I have been trying to locate a cam sensor for my 05 Reg cab with no luck Mopar says they are on national backorder. Is the 5.7 liter hemi sensor the same? I had a 0340 code pop up momentarily the other day during a hard start(sounded like a weak battery).The code disappeared the...
Good morning Im having an issue and trying to determine if its a battery or starter problem.For the last two months while trying to start my 05 reg cab the starter labors to start the truck (slow with delays during cranking but starts hot or cold)Yesterday after running to few stores after my...
after reading alot of threads about tps issues i replaced mine today i had real ly no problems except for a slight hiccup on very slow takeoffs from a stop .well my old tps voltage was .8 closed 4.6 open my new one reads .7 .7closed4.3 open the manuel states closed should be .8 closed is this a...
good afternoon as some of you know my glovebox amp went out on me for those who shot me a pm very much appreciated i will get back to you shortly as of now im looking at my options.as of now i have aftermarket amp running two ten inch subs in boxes i made behind the seats i liked the sound 100%...
how are you guys all205 my power amp took a shit yesterday the one behind the glove box does anyone have one laying around or if you know where i can get one other than dealer a new system isnt in the cards right now im looking just to replace stock thanks pm me if you have one to sell .
having problem bleeding clutch doing it to flush out old fluid.first time around after bleeding pedal felt spongy like air was in it.pulled it in and gave it another bleed but it got worse to were i have no pedal pressure did it for awhile still no pedal.i have steady stream coming from...
good morning guys my 05rc yesterday went crazy on me and i would greatly appreciate some advice and input,this how it started i drove yesterday morning doing some errands for a total of about two hours with a couple of stops during the way.after driving about 35 min my truck started to miss...
I found out today my power steering hose was seeping,the one on top on resiVoir thats the one right next to pulley.its leaking right where the line goes through the nut and it has movement.my question is Before i remove do i need to replace and order new hose or is there an o ring that...
good morning yesterday i found out i had two pistons seized in two front calipers i was looking for someone who rebuilt these.are they old style where they just pop out with air then slide back in or is there something behind them that may be broke.this truck is my dd and i have to decide today...
how are you doing I attempted to change out my front brake pads today 05rc because of brake squeal during driving.upon compressing pistons i found one on each side wont compress all the way in. my question is are they seized or any way to fix without replacing.has anybody else experience this...
today i installed b&M shifter in my 05 rc and the thing sounds like shit.are they supposed to be real noisy or maybe i did something wrong i would be grateful for any input on this.thanks.sounds like vibrating marbles and darth vader on life support.
just put in stinkers oil cooler lines yesterday what a nice product they look great no more oil crud around the crimps if you have not done this yet do it !.plus they ship fast.
on the loosen the four bolt fix[i got that third gear problem]on shifter base 1-how loose should they be and 2-do i actually drive the the truck to try to center it or just move shifter while parked.thanks to all concerned.
I wanted to know if the door lock on my 05 rc is coded my truck came with one key set and just wanted to make copy out of uncoded blank for door only just in case untill i get second coded key and transmitter.thanks
how are you doing ,after gathering all information on problems and issues on these trucks(great club)I finally did a thorough inspection on my new baby and found a little oil on one of my oil cooler lines.now I am covered under warranty but do i replace them myself with the lines sold by our...
how are you guys doing,I was wondering what publications-manuals are out there other than factory manual that can give basic maintenance and torque spec information about these trucks.thanks in advance.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.