Search results

My 06 Quad cab is doing the same thing. Brake light will turn on, randomly . I will look at the sensor and wire connections.

Mine does the pop sound too and it sounds like crap ,about every 5 seconds it makes the sound on startup and after cooldown. I will try tightening the exhaust manifold bolts.

Those temps were at the peak of AZ heat when it is cooler out, in the 70's you could easliy see 40 deg intercooler water temps. I have my overhead counsel outside air temp guage plumbed into the intercooler water line to read intercooler water temps only. I have an AEROFORCE guage to read , IAT1...

It works I have installed in my 02 lightning when it is 110 degrees here it keeps intercooler water temps around 80 deg. If you remove the heat exchanger behind the grill and replace with a insulated storage tank you can get down to 70 deg. No ill effects to inside of cab either . It came with...

As an owner of 3 brands of trucks. I come here to talk horsepower and racing, sure we might crack on each other ,here and there but its all in fun. I don't take anything personally ,each truck has its own engineering quirks , one isn't better then the other. Out of all my fast trucks , I still...

15-50 mobile 1 ,most of year including many 115 degree days , 0-40 mobile one the coldest winter months Dec. to Mar. I always let oil temp get to 150 deg before hammering it. You would be surprised how much pressure is on an oil pump with cold oil. I primed my new engine in my 454 with a good...

Well my TB sticking has disappeared ,after the adjustments , i made. I have run it a few days now ,and no issues. Turning the stop screw in 1 full revolution and loosening the cable bracket bolts and moving bracket forward. I am going to go back and torque the bolts , I didn't use a torque...

I got to take a look at again last night, I made a couple of adjustments , I turned the stop screw in 1 full turn , and loosened the screws on the cable bracket and tilted the assembly forward a little more. It's definatly only happens when the engine is heatsoaked ,sitting in traffic or idle...

I must have set a record for installing one of these, 18 min with a hot engine. I had a ton of errands to do and wanted to get it on before i lost daylight. Throttle response is definately improved, can really tell the diffrence in part throttle , and wide open of course too. I am getting some...

I received it yesterday looks like a very nice unit. I checked for an even gap around the blades and there is no sign of touching ,so I don't see any problems with it sticking. I was too tired to put it on last nght , will try for this afternoon.

UPS is delivering mine today, i got it from Summit $399.99 ,and i used a $25 summit bucks. It was on backorder till June 7th when I put my order in a few weeks ago. BBK must have made a new batch of them. I will put it on tonight.

The DA wasn't very good that day, it pinged on the top and the ecm backed out the timing you can see it on the graph i have printed out. We just put on the rollers for shits. Those Night Runner decals are from a durango NR they are smaller then the originals , I like them , small enough they...

Tell me if the numbers look ok, it was 90 deg air temp and the engine was heat soaked. It pinged on the top also. http://s75.photobucket.com/albums/i287/strucku/VIDEOS/?action=view&current=PSRDynoVideoSRT10.flv Here is my friend Kens Lightning ,he got his street tune before me...

Here is a link to my truck on the dyno. Tell if the numbers look ok at the end it was 90 deg air temp and the engine was heatsoaked. I was pinging a little on the top and the ecm backed out some timing...

It towed pretty good, in my opinion. It was a 18 ft car trailer when i first loaded it ,i was way to far forward and the ass end SRT was dragging i backed up until the bed of the SRT was level. You definatly could feel it was back there driving ,6500 to 7000 pounds. I drove between 70 and 75...

Found suggested towing capacity on google search , 8150 pounds ,but don't know if that is accurate.

Does anybody know the tow rating for the 06 QC. I thought it was 9000 pounds. Trailer and 454 should come in at 6500

Anybody going up tonight? I will be there with my 454SS along with a few vettes and 2010 camaro. I will be towing the 454 with the SRT10 just to see how it does ,this will be the first time towing in my life any tips?

Also I did not get the temp guage with it. I used the ford factory outside air temp sending unit, it has NPT threads. I plumbed it into the intercooler lines and my factory overhead console readout reads intercooler water temps instead of outside air now ,very trick and not another guage to...

I thought about building one myself after installing my friends KC. Where I work we have the same heat exchanger but larger , for hydraulic Oil. I got into a group buy for $400 last year . It was worth $ not sourcing everything out for that price and it fits in the front bumper,very hidden and...